|
2011 Mini Cooper 1.6L No Start
After installing head we had a noise so we ran engine with valve cover off. It stalled and would not start. No communication with DME. I posted here and found out that if the ground wire is left off the valve cover and the car is run it ruins the DME. So I pur...
Summary posted 9/23/2016
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 10 Replies Received (View Replies)10 Replies Received (Hide Replies)
|
Message Closed w/Summary
|
10 Replies Received
10 Replies Received
Related Documents & Media | VIN | WMWSU3C50B |
| Engine | 1.6 L / 4 cyl / GAS |
| Trans | 6-speed Standard |
| Delivery | Fuel Injection / SEFI |
| Emissions | OBD-II Compliant |
| Symptoms | No Start |
| Occurs | Always |
Trouble Codes
| 27DD | Accelerator Pedal Module Pedal Sensor 1 Operating Range |
| 2B4A | Accelerator Pedal Module Pedal Position Sensor Signal 1 |
| 2B4E | Accelerator Pedal Module Pedal Position sensor |
| 2BD2 | Monitoring Power Supply 1 Sensor CY320 |
| 3045 | Protection against tampering SWT Speed limitation Stage 2 |
Message Closed w/Summary
Vehicle Data
2011 Mini Cooper
| VIN | WMWSU3C50B |
| Engine | 1.6 L / 4 cyl / GAS |
| Trans | 6-speed Standard |
| Delivery | Fuel Injection / SEFI |
| Emissions | OBD-II Compliant |
| Symptoms | No Start |
| Occurs | Always |
Trouble Codes
| 27DD | Accelerator Pedal Module Pedal Sensor 1 Operating Range |
| 2B4A | Accelerator Pedal Module Pedal Position Sensor Signal 1 |
| 2B4E | Accelerator Pedal Module Pedal Position sensor |
| 2BD2 | Monitoring Power Supply 1 Sensor CY320 |
| 3045 | Protection against tampering SWT Speed limitation Stage 2 |
Video