
2006 Mercedes-Benz E350 4Matic 3.5L No Start, MIL Lamp on
Car came in rough idle , smoked intake and found manifold to be bad. Remove and replace manifold, check intake valve area for debris, ok. Re-assemble and start ran very bad, codes were air flow sensor and altenator serial interface along with shorted or open s...
FIX posted 3/18/2016
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)6 Replies Received(Hide Replies)6 Replies Received
|
Message Closed w/FIX
|
VIN | WDBUF87JX6 |
Engine | 3.5 L / 6 cyl / GAS |
Trans | 5-speed Automatic (Electronic) |
Delivery | Fuel Injection / SEFI |
Emissions | OBD-II Compliant |
Symptoms | No Start, MIL Lamp On |
Occurs | Always |
Trouble Codes
P1337 | Crankshaft Speed Fluctuation Sensor No Signal |
P1347 | Mass Airflow Sensor Circuit low |
P2182 | Mass Airflow Sensor Upper Switching Threshold Above Specification |
Message Closed w/FIX
Vehicle Data
2006 Mercedes-Benz E350 4Matic
VIN | WDBUF87JX6 |
Engine | 3.5 L / 6 cyl / GAS |
Trans | 5-speed Automatic (Electronic) |
Delivery | Fuel Injection / SEFI |
Emissions | OBD-II Compliant |
Symptoms | No Start, MIL Lamp On |
Occurs | Always |
Trouble Codes
P1337 | Crankshaft Speed Fluctuation Sensor No Signal |
P1347 | Mass Airflow Sensor Circuit low |
P2182 | Mass Airflow Sensor Upper Switching Threshold Above Specification |