|
1998 Porsche Boxster 2.5L Stall, MIL Lamp on,
Hello to all you porsche guru's! I've got a good one, this car came in stalling at idle and on deceleration when the clutch was disengaged. It then would have a difficult time restarting especially after a hot soak. It had a bunch of miss fire faults in the co...
FIX posted 5/9/2012
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 9 Replies Received (View Replies)9 Replies Received (Hide Replies)
|
Message Closed
|
9 Replies Received
9 Replies Received
Related Documents & Media | VIN | WP0CA2989W |
| Engine | 2.5 L / 6 cyl / GAS |
| Trans | 5-speed Standard |
| Delivery | Fuel Injection / SFI |
| Emissions | OBD-II Compliant |
| Symptoms | Stall, MIL Lamp On, |
| Occurs | On Decel, After a Hot Soak |
Trouble Codes
| P0130 | Heated Oxygen Sensor (Bank 1 Sensor 1) Circuit Malfunction |
| P0150 | Heated Oxygen Sensor (Bank 2 Sensor 1) Circuit Malfunction |
| P0154 | Air Fuel Sensor (Bank 2 Sensor 1) Heater Circuit Malfunction |
| P0300 | Multiple Misfire Detected |
| P1124 | TP Sensor Signal Too High / Too Low During Self-Test |
| P1126 | Thermostat Malfunction (Stuck Open) |
Message Closed
Vehicle Data
1998 Porsche Boxster
| VIN | WP0CA2989W |
| Engine | 2.5 L / 6 cyl / GAS |
| Trans | 5-speed Standard |
| Delivery | Fuel Injection / SFI |
| Emissions | OBD-II Compliant |
| Symptoms | Stall, MIL Lamp On, |
| Occurs | On Decel, After a Hot Soak |
Trouble Codes
| P0130 | Heated Oxygen Sensor (Bank 1 Sensor 1) Circuit Malfunction |
| P0150 | Heated Oxygen Sensor (Bank 2 Sensor 1) Circuit Malfunction |
| P0154 | Air Fuel Sensor (Bank 2 Sensor 1) Heater Circuit Malfunction |
| P0300 | Multiple Misfire Detected |
| P1124 | TP Sensor Signal Too High / Too Low During Self-Test |
| P1126 | Thermostat Malfunction (Stuck Open) |
Video