|
2000 Volvo S40 1.9L No Start, Stall, Misfire, Like timing is off
I did the seals and belt put it all together. ran ok. Started to drive and had no power. It was weired if you started it up it would run ok if you cut off restarted had no power. Sometime ok and sometimes ran bad. So I took it apart marked every thing and thin...
FIX posted 5/6/2008
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 7 Replies Received (View Replies)7 Replies Received (Hide Replies)
|
Message Closed
|
7 Replies Received
7 Replies Received
Related Documents & Media | VIN | YV1VS2554Y |
| Engine | 1.9 L / 4 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI |
| Emissions | OBD-II Compliant |
| Symptoms | No Start, Stall, Misfire, Like Timing Is Off |
| Occurs | Always |
| Misc. | 1.9 Turbo / Is a VVT Motor (Variable Valve Timing Cam Gear). |
Trouble Codes
| P0335 | Crankshaft Position Sensor 1 Circuit Malfunction (No Signal) |
| P0341 | Camshaft Position Sensor (TDC) 'A' Circuit No Signal |
Message Closed
Vehicle Data
2000 Volvo S40
| VIN | YV1VS2554Y |
| Engine | 1.9 L / 4 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI |
| Emissions | OBD-II Compliant |
| Symptoms | No Start, Stall, Misfire, Like Timing Is Off |
| Occurs | Always |
| Misc. | 1.9 Turbo / Is a VVT Motor (Variable Valve Timing Cam Gear). |
Trouble Codes
| P0335 | Crankshaft Position Sensor 1 Circuit Malfunction (No Signal) |
| P0341 | Camshaft Position Sensor (TDC) 'A' Circuit No Signal |
Video