
1998 Dodge Ram 1500 ST 5.2L No spark no fuel no communication
I have 4.2 volts on all three wire sensors after replacing crank sensor the engine cranks but will not start have no pcm control at all have removed and cleaned all grounds body and engine when I remove the positive cable the resistance on the grounds drop...
FIX posted 9/6/2020
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)11 Replies Received(Hide Replies)11 Replies Received
|
Message Closed
|
VIN | 1B7HC13Y0W |
Engine | 5.2 L / 8 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | Fuel Injection |
Affected | No Spark No Fuel No Communication |
Conditions | Ground Circuit Has 4.5Ohm Resitance |
Message Closed
Vehicle Data
1998 Dodge Ram 1500 ST
VIN | 1B7HC13Y0W |
Engine | 5.2 L / 8 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | Fuel Injection |
Affected | No Spark No Fuel No Communication |
Conditions | Ground Circuit Has 4.5Ohm Resitance |