
1996 Dodge Ram 1500 5.2L No Start, Hesitation, Cuts out, Stall, Misfire, MIL Lamp on
Hello looking for some help. This truck runs for a little bit then it will act up. Fault code PO320. Pull wiring diagram check all powers and grounds - ok. Replace crank sensor. Test drive problem still there. Install used PCM flash with correct calibration. T...
FIX posted 3/9/2007
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)8 Replies Received(Hide Replies)8 Replies Received
|
Message Closed w/FIX
|
VIN | 3B7HFBY8TG |
Engine | 5.2 L / 8 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI / Multi port |
Emissions | OBD-II Compliant |
Symptoms | No Start, Hesitation, Cuts Out, Stall, Misfire, MIL Lamp On |
Occurs | Intermittently |
Trouble Codes
P0320 | No Crank Reference Signal To PCM |
Message Closed w/FIX
Vehicle Data
1996 Dodge Ram 1500
VIN | 3B7HFBY8TG |
Engine | 5.2 L / 8 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI / Multi port |
Emissions | OBD-II Compliant |
Symptoms | No Start, Hesitation, Cuts Out, Stall, Misfire, MIL Lamp On |
Occurs | Intermittently |
Trouble Codes
P0320 | No Crank Reference Signal To PCM |