
2005 Dodge Ram 3500 ST 5.9L Excessive Emissions, Hesitation, Surge, Cuts out, Poor Fuel Economy, MIL Lamp on
truck runs ok when all codes are cleared, but when under load will go into limp in mode & throw check engine light mostly low boost & ecm hardware failure, has reduced power and will not run well till the codes are cleared. dealer has thrown multiple parts at ...
FIX posted 6/3/2005
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)5 Replies Received(Hide Replies)5 Replies Received
|
Message Closed w/Summary
|
VIN | 3V9MS48C15 |
Engine | 5.9 L / 6 cyl / DIESEL |
Trans | 6-speed Standard |
Delivery | FI |
Emissions | OBD-II Compliant |
Symptoms | Excessive Emissions, Hesitation, Surge, Cuts Out, Poor Fuel Economy, MIL Lamp On |
Occurs | Cold, Hot, Under Load, on Accel, Cruise |
Trouble Codes
P0113 | Intake Air Temperature Sensor Circuit High Voltage |
P0299 | Turbocharger Underboost Problem |
P0336 | CKP Sensor 1 Circuit Intermittent Signal |
P0606 | PCM Processor Error |
Message Closed w/Summary
Vehicle Data
2005 Dodge Ram 3500 ST
VIN | 3V9MS48C15 |
Engine | 5.9 L / 6 cyl / DIESEL |
Trans | 6-speed Standard |
Delivery | FI |
Emissions | OBD-II Compliant |
Symptoms | Excessive Emissions, Hesitation, Surge, Cuts Out, Poor Fuel Economy, MIL Lamp On |
Occurs | Cold, Hot, Under Load, on Accel, Cruise |
Trouble Codes
P0113 | Intake Air Temperature Sensor Circuit High Voltage |
P0299 | Turbocharger Underboost Problem |
P0336 | CKP Sensor 1 Circuit Intermittent Signal |
P0606 | PCM Processor Error |