
1999 Dodge Avenger 2.5L No Start, Poor Idle Quality
Got this 99 Avenger in, with a no start/extended crank. 1/4 throttle and it will start after cranking a bit, closed throttle will not start. Checking MAP code - found 5 volts on map signal wire even when disconnected. 5 volts coming out of PCM and MAP sensor (...
FIX posted 1/3/2005
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)7 Replies Received(Hide Replies)7 Replies Received
|
Message Closed w/FIX
|
VIN | 1B3AU52N9X |
Engine | 2.5 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI / FI |
Emissions | OBD-II Compliant |
Symptoms | No Start, Poor Idle Quality |
Occurs | Always |
Trouble Codes
P0108 | Manifold Air Pressure Sensor Circuit High Voltage |
P0118 | Engine Coolant Temperature Sensor Circuit High Voltage |
P0403 | EGR Control Circuit Malfunction |
P0645 | A/C Clutch Relay Circuit Malfunction |
P1297 | Electrical Load Detector Circuit Low Input |
Message Closed w/FIX
Vehicle Data
1999 Dodge Avenger
VIN | 1B3AU52N9X |
Engine | 2.5 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI / FI |
Emissions | OBD-II Compliant |
Symptoms | No Start, Poor Idle Quality |
Occurs | Always |
Trouble Codes
P0108 | Manifold Air Pressure Sensor Circuit High Voltage |
P0118 | Engine Coolant Temperature Sensor Circuit High Voltage |
P0403 | EGR Control Circuit Malfunction |
P0645 | A/C Clutch Relay Circuit Malfunction |
P1297 | Electrical Load Detector Circuit Low Input |