|
2008 Chrysler Pacifica Touring 4.0L No Start, MIL Lamp on
Please help. This Pacifica has an extended crank. It will not start for about 10 seconds of cranking, then it will finally start. There is NO injector or ignition pulses during the crank. After it starts, it will run fine with no problems. I can shut it off an...
FIX posted 10/27/2014
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 9 Replies Received (View Replies)9 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
9 Replies Received
9 Replies Received
Related Documents & Media | VIN | 2A8GF68X08 |
| Engine | 4.0 L / 6 cyl / GAS |
| Trans | 6-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | No Start, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| P0339 | CKP Sensor ‘A’ Circuit Intermittent Signal |
| U0102 | Lost communication w/ transfer case ctrl module / awd bcm |
| U0114 | FCAN Malfunction (VTM-4 Control Module To PCM) |
Message Closed w/FIX
Vehicle Data
2008 Chrysler Pacifica Touring
| VIN | 2A8GF68X08 |
| Engine | 4.0 L / 6 cyl / GAS |
| Trans | 6-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | No Start, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| P0339 | CKP Sensor ‘A’ Circuit Intermittent Signal |
| U0102 | Lost communication w/ transfer case ctrl module / awd bcm |
| U0114 | FCAN Malfunction (VTM-4 Control Module To PCM) |
Video