
1995 Jeep Wrangler Rio Grande 2.5L No Start
Any Jeep guys I could really use your help. This is the wife's new (to her) Jeep. She drove to the store shut it off and it wouldn't start so she towed it home with AAA. I got home, it had no fuel pressure but the relay was engaging and 12 volts at the pump. I...
Summary posted 9/3/2013
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)10 Replies Received(Hide Replies)10 Replies Received
|
Message Closed w/Summary
|
VIN | 1J4FY19PXS |
Engine | 2.5 L / 4 cyl / GAS |
Trans | 5-speed Standard |
Delivery | Fuel Injection |
Emissions | Not OBD-II Compliant |
Symptoms | No Start |
Occurs | Always |
Trouble Codes
12 | Direct battery input to PCM was disconnected within the last 50 key-on cycles |
33 | An open or shorted condition detected in the A/C clutch relay circuit. |
54 | No fuel sync camshaft signal detected during engine cranking |
55 | Completion of diagnostic trouble code display on the malfunction indicator lamp check engine lamp. |
Message Closed w/Summary
Vehicle Data
1995 Jeep Wrangler Rio Grande
VIN | 1J4FY19PXS |
Engine | 2.5 L / 4 cyl / GAS |
Trans | 5-speed Standard |
Delivery | Fuel Injection |
Emissions | Not OBD-II Compliant |
Symptoms | No Start |
Occurs | Always |
Trouble Codes
12 | Direct battery input to PCM was disconnected within the last 50 key-on cycles |
33 | An open or shorted condition detected in the A/C clutch relay circuit. |
54 | No fuel sync camshaft signal detected during engine cranking |
55 | Completion of diagnostic trouble code display on the malfunction indicator lamp check engine lamp. |