|
2002 Jeep Grand Cherokee Laredo 4.0L Poor Idle Quality, Cuts out, Stall, Misfire, MIL Lamp on
I have a P0353 code and no ground signal to coil driver #3 (tan and orange wire). Ohm tested the 3 driver wires from the coil connector to PCM connector and all 3 are are good. Ohm tested tan and orange wire (#3 driver) to ground and its not grounded. Replaced...
FIX posted 5/30/2012
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 12 Replies Received (View Replies)12 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
12 Replies Received
12 Replies Received
Related Documents & Media | VIN | 1J4GX48S52 |
| Engine | 4.0 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | Poor Idle Quality, Cuts Out, Stall, Misfire, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| P0353 | Ignition Control Module Circuit 3 Malfunction |
Message Closed w/FIX
Vehicle Data
2002 Jeep Grand Cherokee Laredo
| VIN | 1J4GX48S52 |
| Engine | 4.0 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | Poor Idle Quality, Cuts Out, Stall, Misfire, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| P0353 | Ignition Control Module Circuit 3 Malfunction |
Video