|
1998 Dodge Intrepid 2.7L Stall, MIL Lamp on
Car towed in with no start condition, cam sensor code P0340, replaced cam sensor, cleared codes, car started and ran, filled radiator and water was pouring out from the water pump and P0340 code reset, but car did not stall or cut off, replaced water pump and ...
Summary posted 3/23/2011
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 7 Replies Received (View Replies)7 Replies Received (Hide Replies)
|
Message Closed w/Summary
|
7 Replies Received
7 Replies Received
Related Documents & Media | VIN | 2B3HD46RXW |
| Engine | 2.7 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection / SEFI |
| Emissions | OBD-II Compliant |
| Symptoms | Stall, MIL Lamp On |
| Occurs | Intermittently |
Trouble Codes
| P0320 | No Crank Reference Signal To PCM |
| P0340 | Camshaft Position Sensor 'A' (TDC) Circuit Intermittent |
| P0356 | Ignition Control Module Circuit 6 Malfunction |
| P1391 | CKP Or CMP Sensor Signal Intermittent |
| P1695 | No CCD Messages Received From BCM |
| P1698 | No CCD Messages Received From TCM |
Message Closed w/Summary
Vehicle Data
1998 Dodge Intrepid
| VIN | 2B3HD46RXW |
| Engine | 2.7 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection / SEFI |
| Emissions | OBD-II Compliant |
| Symptoms | Stall, MIL Lamp On |
| Occurs | Intermittently |
Trouble Codes
| P0320 | No Crank Reference Signal To PCM |
| P0340 | Camshaft Position Sensor 'A' (TDC) Circuit Intermittent |
| P0356 | Ignition Control Module Circuit 6 Malfunction |
| P1391 | CKP Or CMP Sensor Signal Intermittent |
| P1695 | No CCD Messages Received From BCM |
| P1698 | No CCD Messages Received From TCM |
Video