|
2002 Jeep Grand Cherokee Laredo 4.0L No Start, Stall, MIL Lamp on
Well techs got another one for you. No start on this one. New cam sensor and gear installed in same way it came out. New crank sensor installed. Coil asm installed. Still no start. Well when first came in it had codes P0122 TPS,P1495 LDP, P0340 No cam signal. ...
FIX posted 4/21/2010
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 15 Replies Received (View Replies)15 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
15 Replies Received
15 Replies Received
Related Documents & Media | VIN | 1J4GW48SX2 |
| Engine | 4.0 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI |
| Emissions | OBD-II Compliant |
| Symptoms | No Start, Stall, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| P0122 | Throttle Position Sensor Circuit Low Voltage |
| P0320 | No Crank Reference Signal To PCM |
| P0340 | Camshaft Position Sensor 'A' (TDC) Circuit Intermittent |
| P1495 | EVAP Leak Detection Pump Circuit Malfunction |
Message Closed w/FIX
Vehicle Data
2002 Jeep Grand Cherokee Laredo
| VIN | 1J4GW48SX2 |
| Engine | 4.0 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI |
| Emissions | OBD-II Compliant |
| Symptoms | No Start, Stall, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| P0122 | Throttle Position Sensor Circuit Low Voltage |
| P0320 | No Crank Reference Signal To PCM |
| P0340 | Camshaft Position Sensor 'A' (TDC) Circuit Intermittent |
| P1495 | EVAP Leak Detection Pump Circuit Malfunction |
Video