
1998 Chrysler Sebring LX 2.5L Excessive Emissions, Poor Idle Quality, Hesitation, Surge, Cuts out, Stall, Misfire, Poor Fuel Economy, MIL Lamp on
car runs and starts but runs rough,surges,timing not adjustable has new distributor,has no power,has a crank sensor but no codes indicating itws [...] fills to me that once it starts the computer retards the timing,computer replced twice,disconnected exhaust m...
FIX posted 2/28/2008
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)11 Replies Received(Hide Replies)11 Replies Received
|
Message Closed
|
VIN | 4C3AJ52N2N |
Engine | 2.5 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI |
Emissions | OBD-II Compliant |
Symptoms | Excessive Emissions, Poor Idle Quality, Hesitation, Surge, Cuts Out, Stall, Misfire, Poor Fuel Economy, MIL Lamp On |
Occurs | Always, Cold, Hot, Under Load, on Accel, Turning, Idle |
Misc. | 2D Coupe |
Trouble Codes
P0108 | Manifold Air Pressure Sensor Circuit High Voltage |
Message Closed
Vehicle Data
1998 Chrysler Sebring LX
VIN | 4C3AJ52N2N |
Engine | 2.5 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI |
Emissions | OBD-II Compliant |
Symptoms | Excessive Emissions, Poor Idle Quality, Hesitation, Surge, Cuts Out, Stall, Misfire, Poor Fuel Economy, MIL Lamp On |
Occurs | Always, Cold, Hot, Under Load, on Accel, Turning, Idle |
Misc. | 2D Coupe |
Trouble Codes
P0108 | Manifold Air Pressure Sensor Circuit High Voltage |