
1998 Toyota Land Cruiser 4.7L No Start, MIL Lamp on
Good day to all. We have a 93 Land Cruiser that we replaced engine/transmission with an engine from a 98 Land Cruiser (4.7l). We had to blend together the different wire harnesses, and run new wires to supply powers/grounds to 4.7 ECM. We can communicate w...
FIX posted 4/13/2020
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)17 Replies Received(Hide Replies)17 Replies Received
|
Message Closed w/FIX
|
VIN | [No VIN Available] |
Engine | 4.7 L / 8 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | Fuel Injection |
Emissions | OBD-II Compliant |
Symptoms | No Start, MIL Lamp On |
Occurs | Always |
Trouble Codes
B2796 | No Communication With The Immobilizer System |
P0100 | MAF Sensor Signal Voltage Too High |
P0110 | Intake Air Temperature Sensor Signal Too High |
Message Closed w/FIX
Vehicle Data
1998 Toyota Land Cruiser
VIN | [No VIN Available] |
Engine | 4.7 L / 8 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | Fuel Injection |
Emissions | OBD-II Compliant |
Symptoms | No Start, MIL Lamp On |
Occurs | Always |
Trouble Codes
B2796 | No Communication With The Immobilizer System |
P0100 | MAF Sensor Signal Voltage Too High |
P0110 | Intake Air Temperature Sensor Signal Too High |