|
2006 Isuzu i-280 2.8L Poor Idle Quality, Stall
This Isuzu is back with the same codes. Replaced the Map Sensor with a NAPA part. Also replace the Evap Vent Control Solenoid (attached to the Evap Cannister}. The P0446 code went away but, the Map sensor again set the MIL P0106. VRef is 5.03 Volts, MAP shows ...
FIX posted 3/2/2016
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 5 Replies Received (View Replies)5 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
5 Replies Received
5 Replies Received
Related Documents & Media | VIN | 1GGCS19826 |
| Engine | 2.8 L / 4 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | Poor Idle Quality, Stall |
| Occurs | Cold, Hot, Under Load |
Trouble Codes
| P0106 | Manifold Air Pressure Sensor Range/Performance |
| P0300 | Multiple Misfire Detected |
| P0446 | EVAP Vent Control System Performance |
Message Closed w/FIX
Vehicle Data
2006 Isuzu i-280
| VIN | 1GGCS19826 |
| Engine | 2.8 L / 4 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | Poor Idle Quality, Stall |
| Occurs | Cold, Hot, Under Load |
Trouble Codes
| P0106 | Manifold Air Pressure Sensor Range/Performance |
| P0300 | Multiple Misfire Detected |
| P0446 | EVAP Vent Control System Performance |
Video