|
2000 Nissan Maxima GLE 3.0L Hesitation, MIL Lamp on, Lack of Power
This vehicle starts ok but after a few seconds, falters, stumbles, stalls when attempting to accelerate. Gets better slowly as it warms up. Tested all circuits from PCM to coils and all are good. No shorts to ground or power and no opens. With labscope attache...
FIX posted 9/7/2005
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 13 Replies Received (View Replies)13 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
13 Replies Received
13 Replies Received
Related Documents & Media | VIN | JN1CA31A7Y |
| Engine | 3.0 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI / MultiPort Injection; COP |
| Emissions | OBD-II Compliant |
| Symptoms | Hesitation, MIL Lamp on, Lack of Power |
| Occurs | Cold, Hot, Under Load, on Accel |
| Misc. | Federal Emissions |
Trouble Codes
| P0155 | Heated Oxygen Sensor (Bank 2 Sensor 1) Heater Circuit Malfunction |
| P1220 | TP Sensor 2 Circuit Malfunction |
| P1320 | ICM 4X Reference Circuit No Pulses (Intermittent) |
Message Closed w/FIX
Vehicle Data
2000 Nissan Maxima GLE
| VIN | JN1CA31A7Y |
| Engine | 3.0 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI / MultiPort Injection; COP |
| Emissions | OBD-II Compliant |
| Symptoms | Hesitation, MIL Lamp on, Lack of Power |
| Occurs | Cold, Hot, Under Load, on Accel |
| Misc. | Federal Emissions |
Trouble Codes
| P0155 | Heated Oxygen Sensor (Bank 2 Sensor 1) Heater Circuit Malfunction |
| P1220 | TP Sensor 2 Circuit Malfunction |
| P1320 | ICM 4X Reference Circuit No Pulses (Intermittent) |
Video