Posted to Classifieds Forum on 10/7/2013
Snap On AVR MT3760, John Beam 3D Aligner 2009
1) Near new condition Snappy MT3760 AVR Alternator, starter,
battery tester. Good leads including inductive amp probe in
good shape, no known problems. $750 I will ship to IATN
members for cost of shipping prepaid. from Snappy website:
MT3760 Heavy Duty AVR Heavy Duty AVR, Battery Load Tester,
Electrical System Diagnosis This unit combines the functions
of an ammeter, voltmeter, and an adjustable carbon pile in
one heavy duty unit that is suited to test batteries,
starters, voltage regulators, switches and relay circuitry
on autos, trucks, marine applications, industrial
applications and more. For basic testing or detailed
troubleshooting, the MT3760 performs with fast, easy to read
accurate information. Advanced circuitry provides a high
degree of accuracy, reliability, and protection from
overload or crossed lead wires and minimizes the effects of
RFI. MT3760 Heavy Duty AVR Features:
Amps Bargraph Display shows amps readings graphically.
Ten Megohm input impedance helps to ensure safe testing of
computer circuits with external volt leads.
Manual Freeze Key can be pressed to at any time to freeze
Amps Zero Key provides convenient one touch "0" amperage.
Diode Test Key shows the quality of alternator output as
good, marginal or bad informing the technician of the
condition of diodes and/or stator windings.
Compact Amp Probes allows performing current measurements in
areas with limited access.
LCD displays for amps and volts -- simultaneously display
readings in large, easy-to-read digital format.
1200 amp current range essential for testing today's
automotive, light truck and heavy-duty starting systems.
Carbon pile 15-second indicator automatically signals and
freezes reading. 500 amps load maximum. This eliminates the
need to observe clock or wristwatch when performing battery
Twin Extruded Load Leads reduce tangles and are less
cumbersome for added user convenience. Ammeter Range: 0 to
+/- 1200 ADC in 1 amp increments. Amps Bargraph Display: 0
to 500 ADC in 10 amp increments. Voltmeter Range: 0 to +/-
40.9 VDC in 0.1 volt increments. Ammeter Accuracy: 0-750 +/-
3% of reading + 1 least significant digit. 750 -1200 +/- 6%
of reading + 1 least significant digit. Input Impedance
(Ext. Volts Test Function Only):10 Megohms. Carbon Pile
Load: 500 Amps (maximum) 12 volts only. Carbon Pile Time
Indicator: 15 seconds. Carbon Pile Duty Cycle:15 seconds on
/ 45 seconds off for 200 amp load at 75° F. Extend
cooling period if exceeding ten cycles or 200 amps.
Operating Power Requirement Range: 7.5 to 18 VDC (18 VDC
maximum for load tests).
2) John Beam 3D Vis-Aligner (Snap On), targets, cart,
computer, printer, 2 LCD monitors mounted on alignment tower
(adjustable) 2009 update. No known problems. $6500 plus
shipping, I will palletize for $200 for your shipper to pick
up if required
mark 831-394-1444 9-6 cal time mention IATN to be put
Mark J. Swank
A & A Automotive - Fort Ord
Seaside, California, USA
1 Replies Received
1 Replies Received