Join Now
International Automotive Technicians Network
IH Tractor Hydro186 no start
Posted to HD/Fleet Forum on 10/9/2015 11 Replies

Thanks for any help. I rebuilt the engine a DT436, Rod Brgs, Mains, Oil pump,Pistons and sleeves, valve job, and had the Injectors rebuilt. Got it all together and went to start it and it wouldn't start. Cranked engine till I had Oil Pressure , Bled the injectors all I got was a lot of smoke from unburned fuel. Used some starting fluid and it start but not run above 600 RPM Maybe and die. It ran like it was running on 3 Cylinders and smoked a a huge amount. So I ran a Compression check 375-390 Sec. is 385 - 415. Double checked my Timing, had Injectors checked again, re checked Valve Adj. At a Los Any help would be appreciated. Rick

Richard Miller
Wildlands Inc.
Richland, Washington, USA

11 Replies Received (View Replies)