 Prev |
Professional Automotive Repair Technical Discussions for December 17, 2025 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2015 Ford F-150 Platinum 5.0L Misfire VIN: 1FTEW1EF5F Thank you for all the help I can get I am stumped and hope someone is familiar with this coyote engines and know what I should look for We retime and truck started and ran for one mile and stalled try to start but engine was turning kind of slow and like t... Trouble codes: P0345 (Camshaft position sensor A circuit), P0345 (Camshaft position sensor A circuit) |
View | |
| 2017 Honda Pilot EX-L 3.5L Misfire, MIL Lamp on VIN: 5FNYF6H55H Vehicle came in with bank 2 misfire codes and P219B air fuel ratio variation of cylinder (bank 2). The vehicle already had a catalyst code for bank 2. Cat and oxygen sensors were replaced at that time along with the valve adjustment and spark plugs. Vehicl... Trouble codes: P0304 (4 cylinder misfire), P0305 (5 cylinder misfire), P0306 (6 cylinder misfire), P0300 (Random misfire), P219B |
View | |
| 2006 Jeep Grand Cherokee Laredo 3.7L Oil pressure switch VIN: 1J4GR48K56 Ive got jeep with oil press. sensor problems. Originly it came in with the oil press. light randomly turning on. No codes. Found on scanner it would randomly go from full 5v. and 145psi to 0v and throw the light then go back to full 5v just sitting still. ... |
View | |
| 2017 Kia Forte LX 2.0L MIL Lamp on VIN: 3KPFK4A73H hello all need a little help, car jumped timing and bent valves, replaced all the timing components including both cam sprockets and exhaust camshaft, got it fired up and runs great, reset all the adaptive values to clear p0016 code took out for drive to r... Trouble codes: P0016 (Crankshaft/Camshaft Position Correlation Bank 1 Sensor A Intake), P0340 (Camshaft Position Sensor a or single sensor) |
View | |
| 1985 Pontiac Fiero SE 2.5L Cuts out, Stall VIN: 1G2PF37R3F When I started with the vehicle it w/n start & had a code 33. I checked spark & fuel, no spark, fuel coming from injector. I checked cap, rotor & coil (all ok). I checked fuel pressure (8psi but I question my gauge due to hardly ever using the low pressure... Trouble codes: 33 (MAP sensor would not start), 44 (Lean), 42 (Electronic spark timing) |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers |
