 Prev |
Professional Automotive Repair Technical Discussions for September 11, 2016 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 1999 Ford Econoline Super Duty Custom 6.8L Misfire VIN: 1FDXE40S3X Customer brought Motor home to us complaining of not running right and low on power and no check engine light and no codes.He said he wanted it tuned up.A little hesitant to tune up because of mileage,I wanted to get some check out time.Customer insisted a tun... |
View | |
| 2008 Ford Explorer Eddie Bauer 4.0L No Start, Stall, MIL Lamp on VIN: 1FMEU74E18 hello friends, when the engine starts it run pretty well, there is not problem there, but when i drive the car at least a half hour the check engine light turn on, also the wrench light, the engine stops and the starter don`t works, like a pats problem, i wait... Trouble codes: B1342, P0600, P0607, P1260, P2100, P2104, P2105, U0300 |
View | |
| 2004 Volkswagen Golf GLS 2.0L Surge VIN: 9BWGL61J44 Problem is slight surge around 60mph only in cruise control mode..customer commutes 50+ miles daily to work on freeway and would really like us to get to bottom of this...this is a "fly by wire" throttle body with the cruise controlled internally by the ECM...... |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2008 Mazda 3 i 2.0L overdrive VIN: JM1BK32F78 This vehicle is not yet fixed. The problem has only occured once since. I asked the customer to try to determine if the cruise control might be affected at time of intermittent downshift. Also to see if having the seatbelt disconnected affects the issue; The s... |
7 | |
| 2008 Suzuki XL-7 Limited 3.6L No Start, MIL Lamp on, Cel flashs very fast VIN: 2S3DA21Z88 seeing that its been 3 days with no duplicated condition i will post this as fixed, james was heading me in correct direction with loading the grounds, which could be done, but loading th powers would have been difficult becuase power was fed through a relay a... Trouble codes: P0261 ([...] circuit low), P0264 (Inj 2 low), P0267 (Inj 3 low), C0561 (System disabled info stored invalid serial data recieved), P0691 (Cooling fan relay 1 control circuit low), P0458 (Evap purge solenoid control circuit low). |
3 |
