P0011 Diagnostic Trouble Code Discussion for April 2016
Camshaft 1 Position Sensor Target Performance (Bank 1 Sensor 1)
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0011
| Help Request | Posted | |
| 2011 Audi Q7 Premium Plus 3.0L MIL Lamp on VIN: WA1LGAFEXB P0011: retard set point not reached. check eng lite is on |
April 04, 2016 | |
| 2008 Cadillac SRX 4.6L MIL Lamp on VIN: 1GYEE53A28 P0011: Intake Camshaft Position CMP System Performance Bank 1. This vehicle originally had a P0010, P0011, & P0013. I tested VTC control via my scan tool and found no movement on the intake VTC of bank 1. I checked for voltage to the solenoid and found it acceptable (tested it with a test light). I replaced the prev... |
April 18, 2016 | |
| 2010 Chevrolet Malibu LS 2.4L Poor Idle Quality, Surge, Misfire VIN: 1G1ZB5EB6A P0011: intake camshaft position system performance. Car came in running rough and ses light on.Removed vvt solenoids and found screen in middle grove had what looked like metallic particles on inside of screen.Opened solenoid and flushed with brake cleaner and reinstall, car runs normal.Has anyone else run into... |
April 18, 2016 | |
| 2007 Cadillac Escalade ESV 6.2L Stall, MIL Lamp on VIN: 1GYFK66847 P0011: cmp system performance. This vehicle was towed in for a stall and no start last week the alternator was tested and replaced at that time although it did start when the battery charger was hooked up for 10 mins. There is always a code for a stabilitrac problem that has been showing fo... |
April 20, 2016 | |
| 2007 Cadillac Escalade ESV 6.2L Stall, MIL Lamp on VIN: 1GYFK66847 P0011: cmp system performance. This vehicle was towed in for a stall and no start last week the alternator was tested and replaced at that time although it did start when the battery charger was hooked up for 10 mins. There is always a code for a stabilitrac problem that has been showing fo... |
April 23, 2016 | |
| 2006 Nissan Murano SL 3.5L MIL Lamp on VIN: JN8AZ08W16 P0011: Intake Valve Timing Control Range/Performance (Bank 1). Ses light on and code P0011 current failure. Tested voltage to bk 1 with a 12v lamp hooked to the solenoid connector and it lights following the % on bk1. Ive read about an internal oil leak but dont know exactly where. No bulletins that I can find and no t/ch... |
April 27, 2016 |
