 Prev |
Professional Automotive Repair Technical Discussions for June 3, 2025 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2010 Chevrolet Cobalt LT 2.2L Stall, MIL Lamp on VIN: 1G1AD5F56A Hello have a tough one to me at least. Chevy colbalt with a p0106 and staling surge idle at stop and then stalls. (Like a vacuum leak. Fuel trims are very high. Exhaust back pressure seems good .5psi on wot . Along with fuel pressure. I did find the int... Trouble codes: P0106 (Map performance) |
View | |
| 2004 Hyundai Elantra GLS 2.0L Charging VIN: KMHDN46D64 Hello, here again with a little headache. so customer towed his car with a dead battery died on the road so I charged the battery started the vehicle and found that the alternator was not charging so i replaced the alternator with a new one. started the ve... |
View | |
| 2017 Hyundai Tucson 2.0L timing chain My customer just bought a 17 Tucson with the 2.0 engine. It came to me with very noticeable timing chain noise. I recommended replacing the timing chain components (chain, tensioner, arm, and guide, all gaskets.) The customer gave me the OK so we took it a... |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2007 Acura RDX 2.3L Charging VIN: 5J8TB185X7 Thank you to everyone who responded to the help request. The vehicle issue has been resolved. The high voltage reading problem was caused by the Snap-on scanners (Solus, Solus+, and Zeus), which all showed incorrect data. The issue was correctly identified aft... |
6 | |
| 2017 Jaguar F-Pace Premium 2.0L charging VIN: SADCJ2BNXH Thank you all for your help end up to be a defective crank pulley. A new one fixed the problem |
8 | |
| 2016 Mazda CX-5 Sport 2.5L Cuts out VIN: JM3KE4BY2G After trying the suggestions offered came to the conclusion to replace the high pressure pump. The fuel rail PID was not lying. I didn't think it could run on 55 PSI but it was running on lift pump pressure.This pump has a roller unlike the Escapes have a tapp... Trouble codes: P1710, FUE1, TR1M, SYSTE, T00, 1EAN, P1920. |
8 |
