 Prev |
Professional Automotive Repair Technical Discussions for October 3, 2024 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2014 Audi allroad Premium 2.0L Mechanical VIN: WA1UFAFL4E This car came in with a really bad misfire and I checked and found one of the coils not firing strong, all the plugs were old and worn out, and found 98% leakage and almost 0 psi compression on #4 cylinder. Used a borescope and found one of the exhaust val... |
View | |
| 2013 Ford Edge Sport 3.7L abs VIN: 2FMDK4AK2D ok this one came to us with an abs/traction light on. scanned and got codes c0044-49, u3000-49, c0044-ab u3000-49-ab replaced module with used part got same codes. got another one and used one and kept getting codes c0044-49,c0044-49-ab got a third one use... |
View | |
| 2018 Ford F-150 XLT 5.0L Mechanical VIN: 1FTEW1E58J Good afternoon, I have this F-150 with an engine noise. This noise only occurs after the vehicle has sat for a couple of hours. It sounds like a connecting rod hammering but only lasts for about 1-2 second after start-up. We have removed the engine oil pan... |
View | |
| 2003 Infiniti I35 3.5L Hesitation, MIL Lamp on, Throttle VIN: JNKDA31A73 Vehicle came to us going into limp mode with check engine light on and DTC P2138 wrong app sensor rationality. Another shop already replaced throttle pedal assembly. connected scan tool and monitored APP 1 and 2. According to service manual voltage should ... Trouble codes: P2138 (Wrong APP sensor rationality signal) |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2017 GMC Savana 2500 4.8L Supplemental Inflatable Restrain warning light VIN: 1GTW7AFF2H The issue with this vehicle is resolved! The scan tool function for setting up the SDM in BCM is what needed to be done. Not sure why it lost this in the first place, but the light no longer flashes. This was something I attempted to do BEFORE the SDM refla... |
7 |
