
![]() |
Professional Automotive Repair Technical Discussions for June 20, 2024 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for All Makes and Models
Help Request | Answers | |
1998 Chevrolet S10 2.2L MIL Lamp on VIN: 1GCCS1445W Ok so after installing a new egr valve(was stuck at 10% at idle when valve was closed) i did a battery reset and cleared codes and now on decel every trip i get a p0401 for exhaust gas recirculation (egr) flow insufficient if i remove the egr i have good e... Trouble codes: P0401 (Egr insufficent flow) |
View | |
2008 Chrysler Aspen Limited 5.7L engine Hello everyone seeing if you could help me this mess.I have a 2008 chry aspen with a 5.7 thats leaks oil after you drive it rear main seal i would think use a bore to look inside bell housing looks dry looks like its coming from the rear of the left head I... |
View | |
2008 Saturn Sky Red Line 2.0L Misfire, MIL Lamp on VIN: 1G8MG35X18 The check engine light will flash most of the time. Most of the time you cannot feel a misfire. I got another customer's vehicle that was exactly the same year and engine to compare information. The cam and crank signals are identical. The only thing diffe... Trouble codes: P0301 (Cylinder 1 misfire), P0302 (Cylinder 2 misfire), P0303 (Cylinder 3 misfire), P0304 (Cylinder 4 misfire) |
View |
Fixes & Summaries for All Makes and Models
Fix/Summary | Answers | |
2008 Ford E-350 Super Duty XLT 5.4L No Start, crank no start VIN: 1FBSS31L88 Firstly I wanted to thank every single person that contributed and responded to this help request, I really appreciate you all taking the time out of your days to chime in with advice or information. We ended up finding a broken ignition coil feed wire right a... |
13 | |
2010 Toyota Tacoma 4.0L Engine VIN: 5TEMU4FN8A Well the guys who said OEM parts only called it. I had the right diagnosis initially. Replaced the MAF sensor, but it was reading incorrectly nonetheless. Replaced it with an OEM sensor and everything is as it should be. Thanks for the help! |
15 |