 Prev |
Professional Automotive Repair Technical Discussions for May 9, 2024 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2010 BMW X5 xDrive48i 4.8L Suspension VIN: 5UXFE8C57A There is a stabilizer bar like noise/rattle over small bumps on both sides in the front. Every time you hit a bump there is noise that rattles like 3-4 times. The brake pulse it has also makes the same noise happen. The noise occurs with or without brake a... |
View | |
| 2010 Hyundai Sonata Limited 3.3L No Start VIN: 5NPEU4AF5A Hello, and thanks in advance for any insight on this one. Came in as a "cranks ok-no start". Checked for spark, had none. Checked injector pulse-ok. No codes present. Rpm signal is present when cranking. Coil primary has 12v but no ground pulse from pcm.... |
View | |
| 2012 Jeep Grand Cherokee Laredo 3.6L No Start Got this 2012 Grand Cherokee Laredo 3.6 belongs to a car lot. They said they purchased it, drove it to car lot, hired locksmith to program a couple extra keys and now won't crank.(Got a feeling there's more to the story)I pulled a code B2254 Column Lock Mo... Trouble codes: B2254 (Column Lock Module Internal) |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2006 Ford F-350 Super Duty XLT 6.0L turbo VIN: 1FTWW31P86 Looking back the truck has had no power for quite some time , when trying to beat a traffic light and it just fell flat on it's face several months ago got pulled over by a k9 unit not a traffic cop for jumping the light , rip me a new butt let me off with a d... |
6 | |
| 2012 Toyota Tundra 4.6L Differential VIN: 5TFUM5F11C Thanks for the help. I removed the 4x4 high actuator from the transfer case motor and the gears were rusted up. The vent hose on top the motor was split and allowing moisture inside. I cleaned the gears up as good as I could and timed the actuator per Youtube ... |
7 |
