
![]() |
Professional Automotive Repair Technical Discussions for October 2, 2023 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for All Makes and Models
Help Request | Answers | |
2014 Chevrolet Suburban 1500 LT 5.3L Misfire VIN: 1GNSKJE70E Read related work info Trouble codes: P0306 (Misfire Cylinder 6) |
View | |
2012 Dodge Journey SE 2.4L Engine VIN: 3C4PDCAB9C Vehicle came in with a rattle from timing chains - replaced timing chain and Actuators, now its a no start - cranking speed seems low Have checked timing several times all good, but PIDs show crank out of sync. Could this have anything to do with cranking ... |
View | |
2012 Ford Escape Limited 3.0L inop VIN: 1FMCU9EG0C Good afternoon to all, This escape came in with a complaint that the cruise control stopped working during a hill climb on a road trip. The system was armed and was holding speed, then it popped off and started to decelerate. Wasn't able to use cruise for ... |
View | |
2008 Mercedes-Benz E350 3.5L advice VIN: WDBUF56X48 Hello group, this car is needing a valve body. with this mileage I pushed customer to replace complete transmission but he wants to roll the dice on repair. I have NASTF and Xentry. MB says complete VB not available anywhere at this time. I could conceivab... |
View | |
2017 Volkswagen Tiguan S 2.0L Intake Manifold Flap VIN: WVGRV7AXXH Vehicle came in with code p2015 Intake Manifold Flap Position Sensor (Bank 1). Replaced the intake, but keep getting code p2004 Intake Manifold Flap; Bank 1-P2004 - 000 - Stuck Open - MIL ON. Discovered the solenoid for the IMRC had a plug on the vent p... |
View |
Fixes & Summaries for All Makes and Models
Fix/Summary | Answers | |
2007 Mercedes-Benz S550 5.5L AC Compressor VIN: WDDNG86X37 Following Marks advice, I tried commanding the AC compressor on through the SAM module. Everything showed that it should be on, but had no AC activation. Believe the front SAM module to be bad. Unfortunately customer doesn't want us to continue with the veh... |
5 |