 Prev |
Professional Automotive Repair Technical Discussions for September 18, 2023 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2016 Cadillac CTS V 6.2L Poor Idle Quality, Misfire, MIL Lamp on VIN: 1G6A15S6XG This car has a misfire, on all cylinders. At idle, it will randomly misfire here and there, but if you hold the rpms up to 2k, it shows a lot of misfires on all cylinders. When driving the car, it seems to be okay under light load, but once you get to crui... Trouble codes: P0300 (Random Misfire) |
View | |
| 2018 Chevrolet Silverado 1500 LTZ 5.3L Miss on # 8 Cylinder VIN: 1GCVKSEC7J This truck has a miss at idle on number 8 cylinder. The mifire counts go way down at higher engine speed. As you can see in repair history this one has us stumped. There are no tapping noises. I would hope that would rule out lifters which these truck seem... |
View | |
| 2008 GMC Sierra 1500 WT 5.3L MIL Lamp on, low power mode VIN: 2GTEK19J68 Look at freeze frame data,absolute throttle position %20,app d circuit 20%,e circuit 0 %,,cleared codes and retest several times,could not duplicate,customer drove vehicle 30 miles at freeway speeds,stopped at stop light and started to accel went into low ... Trouble codes: P2127 (App sensor 2circuit e low voltage) |
View | |
| 2007 Mazda 6 S 3.0L Misfire, knocking VIN: 1YVHP80D97 Vehicle ran fine, replaced valve covers, no it is missing on cylinger 6 and has severe knocking that goes away when cylinder #6 is disabled by either pulling spark plug or disconnecting ignition coil looking for a good known waveform for crank/cam sensor... |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2019 Ford F-150 XL 5.0L harsh engagement VIN: 1FTEW1E5XK Jasper sent another unit, shop installed it and all is well. Shifts fine. As always thanks to all who took time to reply. Allen |
10 |
