 Prev |
Professional Automotive Repair Technical Discussions for December 20, 2021 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2018 Ford E-450 6.2L No Start This is a FedEx fleet vehicle. The issue we are experiencing at this time is a intermittent no start w/crank when the vehicle has been cold soaking outside when its below freezing and the vehicle is brought inside a heated building. The concern has only ap... |
View | |
| 2013 Toyota Sienna XLE 3.5L No communication VIN: 5TDYK3DC5D This thing is an intermittent no start. When it doesn't start the cluster goes dark. When it does start the gauges light up but all rear 0. The only system that gives us any data is tpms. This comes up in engine after it tells us there is no comm, then bli... |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2012 BMW X5 xDrive35d 3.0L Cuts out VIN: 5UXZW0C51C For a change owner took our advice and was going to trade it.i would still be interested in finding a good BMW tech near here that I could refer people to.Thanks again. Trouble codes: 4BF4, 4530 (Charge Air Pressure Control Deviationxhaust Gas Differential Pressure Sensor Diesel Particle Filter Signal), 4D00, 4B81, P244B. |
4 | |
| 2010 Chevrolet Suburban 1500 LT 5.3L Poor Idle Quality, Cuts out VIN: 1GNUKJE38A Cam Gear pin was bent. timing was off. I regrettably should have installed a Amp Clamp and a #1 cylinder trigger and should tech how to do that with Scope. Oh well Patience and a teaching moment next time |
9 | |
| 2014 Hyundai Veloster Turbo 1.6L Cuts out VIN: KMHTC6AE9E Thanks for the replys, I scoped the cam sensors, the crank sensor and they looked to be in sync and fine. i also scoped the pedal position sensors and and trottle position sensors and found no drop outs. the problem was always at the same rpm regardless of e... |
9 |
