 Prev |
Professional Automotive Repair Technical Discussions for October 28, 2021 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 1994 Chevrolet C1500 Cheyenne 5.7L Poor Idle Quality, Stall VIN: 1GCDC14K9R Okay everyone here we go with yet another weird case. Truck starts runs perfectly fine for three seconds then dies. If you feed propane it will run all day. Take away additional fuel and it dies. If you pump the gas pedal it will stay running stop pumping ... |
View | |
| 2006 Chevrolet HHR LT 2.2L Stall VIN: 3GNDA23DX6 vehicle will stall intermittenly while driving, no codes in any system, no other symptoms. have checked all pertinent data. have also checked fuel pressure, spark, timing, injector pulse, M.A.F., throttle body, and accellerator pedal sweep, all passed with... |
View | |
| 2012 Chrysler Town & Country Touring 3.6L No Start VIN: 2C4RC1BG8C I have tried everything that I can think of, even got a witech and monitored all inputs, with no issues. Looking for any ideas for getting rid of this vehicle. Thanks in advance for any input. |
View | |
| 2014 GMC Sierra 1500 SLE 5.3L 3,5,R apply VIN: 1GTV2UEC7E We replaced the transmission with a NEW GM unit due to slipping gears and shuddering. Flashed TCM with latest calibration. Did Reset on adapts. Performed relearn test drive. Fluid level is good and brand new. First and second test drives were good. Third t... |
View | |
| 2013 Hyundai Sonata GLS 2.4L No Start VIN: 5NPEB4AC6D vehicle was towed in cranks but will not start. spray intake with brake cleaner and vehicle runs. took fuel sample-good, tank fuel pump pressure 68psi, high pressure pump reading on scan tool 1425 psi, all pids look normal except barro reading 13.5 in.Hg. ... |
View | |
| 2006 Infiniti G35 3.5L Flexplate bolts broken VIN: JNKCV51E06 Removed transmission for replacement. Found rear main leaking. Upon attempting to remove the flexplate bolts , 4 started turning loose, then seized and snapped off. The 5th one left 1/4 inch of the bolt tip threads in the crank. I turned one of the best ... |
View | |
| 1996 Porsche 911 Carrera 4 3.6L Misfire, MIL Lamp on VIN: WP0AA2998T This car came in with injector circuit faults for cylinders 1 and 5. I've tried all the typical tests (test/swap injectors, ohm out harness, scoped the circuit, swapped DMEs. I cant come up with any definitive answers. After swapping the DME, there was onl... Trouble codes: P1237 (Injector circuit cylinder 1 Open) |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2007 GMC Sierra 2500 HD Classic SL 6.0L ABS reprogramming VIN: 1GTHK29U57 Well just like everyone said, reprogramming is not necessary when only the hydraulic pump is replaced.Bleeding the brakes did take a while,manually and also 3 automated bleeds w/scan tool. BUt good pedal now & shes out the door.Thanks to all |
8 | |
| 2007 Honda Odyssey Touring 3.5L power steering noise and charging VIN: 5FNRL38847 Looks like the OE belt may have solved my issue. It has been 3 days now and she says all is good so far. I would love to confirm a long term fix but she is trading it in this weekend. I can't understand how a belt issue would focus noise at the ps pump and c... |
25 | |
| 2003 Nissan Maxima SE 3.5L RF window VIN: JN1DA31AX3 Fixed, the master switch was stopping the communication data line from switching it goes over from 0 to 12v Square-wave but not a 50/50 duty cycle, also the Square wave is there once the key is turned on, no need to hit the switch. Thanks for your help |
5 |
