 Prev |
Professional Automotive Repair Technical Discussions for October 18, 2021 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2003 Chevrolet S10 4.3L High idle VIN: 1GCCS19X13 The issue that this truck has is an idle of 3200 rpm's when clutch pedal is pressed,vehicle moving, once truck stops the idle does come down, while driving it does fine it does not try to accelerate by itself, so far not a safety concern yet. The only dtc'... Trouble codes: P0300 (Random misfire) |
View | |
| 2008 Nissan Frontier Nismo Off-Road 4.0L MIL Lamp on VIN: 1N6AD06W58 vevhicle has p0011 and p0021 tming chain is new and all marks are on checked oil control vales both resistance and operation on bench good checked for 12 volts at both red wires at so;enoid and all ok checked continuity at both white wire and lt green wire... Trouble codes: P0011, P0011 |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2004 Dodge Ram 1500 ST 5.7L Stall, MIL Lamp on VIN: 1D7HA18D84 THANKS to all that took the time to reply! I appreciate it. The problem actually was... the cam sensor bolt threads! When I installed the new cam sensor, just tightened down the bolt like normal, problem was the sensor was still a bit loose! The bolt tightened... Trouble codes: P0344 (Intermittent lose of cam signal). |
5 | |
| 2009 Dodge Journey SXT 3.5L Pcm VIN: 3D4GG57V59 We replaced the computer with an rebuilt exchange unit, had it re-flashed and the problem was solved. |
3 | |
| 2008 GMC Canyon WT 3.7L No Start VIN: 1GTCS14EX8 OK, this vehicle is still not starting. I received another ECM, installed it, and the problem still exists. I still show no cranking RPMs. As Michael [...] suggested, I still believe the ECM is the problem I have replaced the crank sensor,... Trouble codes: P1336 (crankshaft sensor correlation not learned). |
8 | |
| 2014 Mazda 3 i Grand Touring 2.0L Poor Idle Quality VIN: JM1BM1M73E Thank you all for your help. We ended up removing the valve cover and found a bad lifter and rocker arm on #1 we had that replaced and now it's all good. I'm thinking it was driven hard after the EFI. Great group of professionals thank you for taking the time... Trouble codes: P0300 (p0301-), P0301. |
10 | |
| 2007 Mercedes-Benz E350 3.5L MIL Lamp on VIN: WDBUF56X07 For reasons unknown to me my manager and customer decided to part ways regarding this problem. I suppose we will get a demerit. I do appreciate the effort of those who responded. Trouble codes: P0051, P0031. |
5 | |
| 2007 Nissan Xterra X 4.0L Hesitation, Surge, Misfire, MIL Lamp on VIN: 5N1AN08U57 I'm closing this as of now, I performed a manual compression test and all were 165psi so I went back to checking for electrical issues which led me find no wiring diagrams for 6 wire AF sensors which is what I have. Everything shows 4 wire sensors and none of ... Trouble codes: P0300. |
11 | |
| 2004 Volvo V70 R 2.5L rear springs VIN: YV1SJ52Y24 I put those rustys back in. Had a long chat with the client about broken springs on 2004 volvos, made it clear to him on the phone and on his repair order that there would be no warranty. Down the road he goes with 4 worn out tires /chassis setting message (he... |
8 |
