
P0088 Diagnostic Trouble Code Discussion for July 2021
Fuel Rail Pressure Too High
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0088
Help Request | Posted | |
2008 Land Rover LR2 HSE 3.2L No Start, Stall, MIL Lamp on VIN: SALFR24N08 P0088: Fuel rail pressure to high. ... vehicle, it would occasionally sputter and stall. It would then need to sit for 10 minutes or so before being able to restart the engine. Sounds kind of like a failing fuel rail pressure sensor or pump right? Confirmed the code that is stored, P0088... |
July 19, 2021 | |
2012 Volkswagen Eos Komfort 2.0L Poor Idle Quality, Misfire, MIL Lamp on VIN: WVWBW7AHXC P0088: high fuel rail pressure. hello iatn have a eos here with high fuel pressure mostly at idle. on start up i start with roughly 900 psi and it will climb to 1900 2000 within a min or two and starts missing and running rough. scan tool shows a desired psi of 580. driving specific and ... |
July 21, 2021 | |
2011 Chevrolet Silverado 2500 HD LT 6.6L No Start VIN: 1GC2KXC80B P0088: Fuel rail pressure too high. ... Originally it came in for an intermittent hard start/long crank. Determined it had a bad injector. Ordered parts and on the day I went to do the project it refused to start at all. Pushed it in, replaced injector and rebuilt fuel filter head just for ... |
July 30, 2021 |