 Prev |
Professional Automotive Repair Technical Discussions for April 15, 2018 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2015 Honda Civic Si 2.4L No Start VIN: 2HGFB6E52F After the car was towed to the shop, tech found the following code. B12C5, engine start/stop switch failure. Tech found no lights on the dash when the button was depressed. Tech did find that if you unplug the battery, and then plug it back in, the dash li... Trouble codes: B12C5 |
View | |
| 1993 Toyota Land Cruiser 4.5L Differential Got this vehicle in with a pinion speed knocking on accel. from front differential. Removed axles and am having a problem pulling the differential out of the housing. It seems to be hanging up on something. This diff. has an actuator on it and alldata does... |
View | |
| 2007 Toyota Sienna LE 3.5L Starting VIN: 5TDZK23C67 tested b+ on all circuits has that tested IGT at coil and at PCM, tested all IGF signals starts at 5 volts drops as should still starts and dies cleared codes all coil codes comeback losing pluse at injectors as said before tested circuits and signals with lab... |
View | |
| 2008 Toyota RAV4 2.4L transmission VIN: JTMBD33VX8 Hello folks, This car has a rattle, sounds just like an exhaust shield in front of the drivers feet,basically were the transmission is,It does rattle through the floor also. This only happens in fourth gear at speeds of 38 to 41 miles an hour at 17 to 18 h... |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2003 Ford Expedition Eddie Bauer 5.4L monitors wont run VIN: 1FMFU18L63 i recommended a new ecm ,customer declined. thanks for all the advice guys. |
10 | |
| 2011 Mercedes-Benz E350 3.5L Surge VIN: WDDHF5GB8B We did diagnose the torque converter, with scanner turned off lockup and no more surging. Customer had us stop there, says he?s going to trade it in. So thanks so much for all the help:-) Sorry it took so long to close this post, 3 weeks in Reno fixing health ... |
12 |
