P0011 Diagnostic Trouble Code Discussion for July 2016
Camshaft 1 Position Sensor Target Performance (Bank 1 Sensor 1)
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0011
| Help Request | Posted | |
| 2008 Chevrolet Uplander LS 3.9L No Start, Poor Idle Quality, Cuts out, Stall VIN: 1GNDU23198 P0011: Cam Over advanced. After the engine rebuild on a 3.9 VVT (No AFM)the VVT Actuator will not hold the desired 5° at idle. When coming off RPM back to idle it will come back to 7-8° then ramp up to 27° while still idling (Hot only and computer commanding 5°). Pulled solenoid off st... |
July 12, 2016 | |
| 2004 Porsche Cayenne S 4.5L No Start, MIL Lamp on VIN: WP1AB29P34 P0011: bank 1 camshaft position timing over advanced. Intermittent no start, sounds like no compression, scoped cam and crank signal they look ok ,when it does start it runs good, i believe the cam actuator could be sticking, not sure how to test this actuator, i was using IScan 2 for diagnostics and also just co... |
July 27, 2016 |
