P0016 Diagnostic Trouble Code Discussion for October 2014
Crankshaft/Camshaft Timing Misalignment
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0016
| Help Request | Posted | |
| 2010 Audi A5 Quattro 2.0L No Start, MIL Lamp on VIN: WAUCFAFR2A P0016: Correlation b1 sensor a. ... running bad with lack of power about 1 week ago. Suddenly she tries to start the engine one day and it cranks but will not start. We pulled all the codes and checked for spark. Spark is good. Computer has 11 codes stored. Customer stated that the check eng... |
October 03, 2014 | |
| 2010 Hyundai Genesis Coupe 2.0T 2.0L No Start VIN: KMHHT6KD3A P0016: cam/crank position correlation bank 1 sensor a. vehicle came in for a no start, tried to start and sounded like it had no compression. pulled valve cover off to inspect timing chain and found that it was intact and the cams turned with the sprockets. did a compression test on it and found low compression in... |
October 08, 2014 | |
| 2010 Hyundai Genesis Coupe 2.0T 2.0L No Start VIN: KMHHT6KD3A P0016: cam/crank position correlation bank 1 sensor a. vehicle came in for a no start, tried to start and sounded like it had no compression. pulled valve cover off to inspect timing chain and found that it was intact and the cams turned with the sprockets. did a compression test on it and found low compression in... |
October 10, 2014 | |
| 2007 Volkswagen Jetta 2.5 2.5L MIL Lamp on VIN: 3VWHF71K87 P0016: cam and crank correlation factory 00022 code. ... timing components code p0016 shows up after running for about 30 seconds. Found cam adjuster frozen initially with no change in timing angle. Replaced adjuster and oil control solenoid, find timing within spec at -2 degrees and startup then goes to -40 deg... |
October 20, 2014 | |
| 2004 Chevrolet Trailblazer LS 4.2L MIL Lamp on VIN: 1GNDS13S04 P0016: Camshaft Position Actuator System Performance. ... old owner is tired of the mil light.this is a very well kept truck. oil very clean but we changed it anyhow (maxlife 5w30). We get this P0016 code every time the truck is cranked up. scoped the cam sensor & pattern looks good. Changed the Ckp figuring ... |
October 30, 2014 |
