Join Now
International Automotive Technicians Network

P0340 Diagnostic Trouble Code Discussion for July 2014

CMP Sensor Circuit Malfunction

Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0340
Help Request Posted
2008 Honda Accord EX 2.4L No Start, Stall, MIL Lamp on VIN: 1HGCP26878
P0340: cam sensor a. ... but no start, checked fuel, spark, both ok, checked codes and found p1009, vtc timing advance problem, checked oil condition and level, both ok, changed oil to make sure right visc. 5w/30, remove oil passage screen and cleaned but wasnt dirty, removed vtc ...
July 08, 2014
2002 Hyundai Elantra GLS 2.0L Lack of power VIN: KMHDN45D32
P0340: Camshaft Position Sensor Circuit Malfunction. ... all line up. Vehicle has no power under load. Has a p0340 code replaced cam position sensor. no improvement in drivability.
July 14, 2014
1999 Ford Escort LX 2.0L MIL Lamp on VIN: 1FAFP10P0X
P0340: Camshaft Position Sensor A Circuit Bank 1 or single sensor. This 2.0 is a split port.It doesn't have A VCT solenoid Im I looking at a bad computer or has some one installed the wrong one. The code comes on as soon as you switch it on.Dont believe engine has been changed. Don't see any wires that would be going to a VCT...
July 15, 2014
2004 Chrysler 300M 3.5L No Start VIN: 2C3HE66G94
P0340: No Camshaft Sensor Signals At PCM. This vehicle has intermittent no start, code PO340,344 cranks sensor, has had three sensors one from other shop, one at dealer ship one from us, odd thing we found is when fails and we back prob to scope sensor engine will start, first thought maybe pin damage...
July 22, 2014