Join Now
International Automotive Technicians Network

P0600 Diagnostic Trouble Code Discussion for March 2014

Serial Communication Link


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0600
Help Request Posted
1998 Nissan Quest GXE 3.0L MIL Lamp on VIN: 4N2ZN1110W
P0600: TCM Communication Line Circuit Malfunction. Vehicle failed emissions with a p0600. Ran the flow chart and got to the voltage test. The test has you check for voltage at pin 24 and 29 for 6-8 volts. I have no voltage on pin 24. Replaced PCM (used) 2 times and same result. I even tried a TCM from one of t...
March 25, 2014
1998 Nissan Quest GXE 3.0L MIL Lamp on VIN: 4N2ZN1110W
P0600: TCM Communication Line Circuit Malfunction. Vehicle failed emissions with a p0600. Ran the flow chart and got to the voltage test. The test has you check for voltage at pin 24 and 29 for 6-8 volts. I have no voltage on pin 24. Replaced PCM (used) 2 times and same result. I even tried a TCM from one of t...
March 25, 2014
1998 Nissan Quest GXE 3.0L MIL Lamp on VIN: 4N2ZN1110W
P0600: TCM Communication Line Circuit Malfunction. Vehicle failed emissions with a p0600. Ran the flow chart and got to the voltage test. The test has you check for voltage at pin 24 and 29 for 6-8 volts. I have no voltage on pin 24. Replaced PCM (used) 2 times and same result. I even tried a TCM from one of t...
March 25, 2014
1998 Nissan Quest GXE 3.0L MIL Lamp on VIN: 4N2ZN1110W
P0600: TCM Communication Line Circuit Malfunction. Vehicle failed emissions with a p0600. Ran the flow chart and got to the voltage test. The test has you check for voltage at pin 24 and 29 for 6-8 volts. I have no voltage on pin 24. Replaced PCM (used) 2 times and same result. I even tried a TCM from one of t...
March 25, 2014
1998 Nissan Quest GXE 3.0L MIL Lamp on VIN: 4N2ZN1110W
P0600: TCM Communication Line Circuit Malfunction. Vehicle failed emissions with a p0600. Ran the flow chart and got to the voltage test. The test has you check for voltage at pin 24 and 29 for 6-8 volts. I have no voltage on pin 24. Replaced PCM (used) 2 times and same result. I even tried a TCM from one of t...
March 25, 2014