Join Now
International Automotive Technicians Network

P0011 Diagnostic Trouble Code Discussion for March 2014

Camshaft 1 Position Sensor Target Performance (Bank 1 Sensor 1)


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0011
Help Request Posted
2008 Infiniti G37 Sport 3.7L Cuts out, MIL Lamp on VIN: JNKCV64E18
P0011: intake valve timing control performance bank 1. The P0011 code will occur on this vehicle within 30-60 seconds of starting vehicle and letting idle. As per the repair history, removed front timing cover. Verified the correct chain timing, replaced the rear timing cover gasket (which was blown out), verified...
March 04, 2014
2004 Nissan Maxima SL 3.5L Hesitation, spark knock VIN: 1N4BA41E64
P0011: Intake Valve Timing Control Range/Performance (Bank 1). The car arrived 2.5 quarts low on oil. The oil was also filthy. I did an oil change with 0- 30 synthetic. The 2 codes were pending. I then cleared the codes and saved the scan data and freeze data. Driving the car, it has absolutely no power at all, and starts...
March 14, 2014
2004 Nissan Maxima SL 3.5L Hesitation, spark knock VIN: 1N4BA41E64
P0011: Intake Valve Timing Control Range/Performance (Bank 1). The car arrived 2.5 quarts low on oil. The oil was also filthy. I did an oil change with 0- 30 synthetic. The 2 codes were pending. I then cleared the codes and saved the scan data and freeze data. Driving the car, it has absolutely no power at all, and starts...
March 27, 2014
2006 Nissan Murano SL 3.5L MIL Lamp on VIN: JN8AZ08T16
P0011: Intake Valve Timing Control Range/Performance (Bank 1). ... the timing chains for him. Engine runs well but sets this correlation code P0011. At idle bank 2 is -1 degrees and bank 1 is 15 degrees. Bank 1 does not moved off 15 degrees at any time. bank 2 will go to -4 degrees while @ 2000. I could not find any clear...
March 31, 2014
2008 Infiniti G37 Sport 3.7L Cuts out, MIL Lamp on VIN: JNKCV64E18
P0011: intake valve timing control performance bank 1. The P0011 code will occur on this vehicle within 30-60 seconds of starting vehicle and letting idle. As per the repair history, removed front timing cover. Verified the correct chain timing, replaced the rear timing cover gasket (which was blown out), verified...
March 04, 2014
2004 Nissan Maxima SL 3.5L Hesitation, spark knock VIN: 1N4BA41E64
P0011: Intake Valve Timing Control Range/Performance (Bank 1). The car arrived 2.5 quarts low on oil. The oil was also filthy. I did an oil change with 0- 30 synthetic. The 2 codes were pending. I then cleared the codes and saved the scan data and freeze data. Driving the car, it has absolutely no power at all, and starts...
March 14, 2014
2004 Nissan Maxima SL 3.5L Hesitation, spark knock VIN: 1N4BA41E64
P0011: Intake Valve Timing Control Range/Performance (Bank 1). The car arrived 2.5 quarts low on oil. The oil was also filthy. I did an oil change with 0- 30 synthetic. The 2 codes were pending. I then cleared the codes and saved the scan data and freeze data. Driving the car, it has absolutely no power at all, and starts...
March 27, 2014
2006 Nissan Murano SL 3.5L MIL Lamp on VIN: JN8AZ08T16
P0011: Intake Valve Timing Control Range/Performance (Bank 1). ... the timing chains for him. Engine runs well but sets this correlation code P0011. At idle bank 2 is -1 degrees and bank 1 is 15 degrees. Bank 1 does not moved off 15 degrees at any time. bank 2 will go to -4 degrees while @ 2000. I could not find any clear...
March 31, 2014
2008 Infiniti G37 Sport 3.7L Cuts out, MIL Lamp on VIN: JNKCV64E18
P0011: intake valve timing control performance bank 1. The P0011 code will occur on this vehicle within 30-60 seconds of starting vehicle and letting idle. As per the repair history, removed front timing cover. Verified the correct chain timing, replaced the rear timing cover gasket (which was blown out), verified...
March 04, 2014
2004 Nissan Maxima SL 3.5L Hesitation, spark knock VIN: 1N4BA41E64
P0011: Intake Valve Timing Control Range/Performance (Bank 1). The car arrived 2.5 quarts low on oil. The oil was also filthy. I did an oil change with 0- 30 synthetic. The 2 codes were pending. I then cleared the codes and saved the scan data and freeze data. Driving the car, it has absolutely no power at all, and starts...
March 14, 2014
2004 Nissan Maxima SL 3.5L Hesitation, spark knock VIN: 1N4BA41E64
P0011: Intake Valve Timing Control Range/Performance (Bank 1). The car arrived 2.5 quarts low on oil. The oil was also filthy. I did an oil change with 0- 30 synthetic. The 2 codes were pending. I then cleared the codes and saved the scan data and freeze data. Driving the car, it has absolutely no power at all, and starts...
March 27, 2014
2006 Nissan Murano SL 3.5L MIL Lamp on VIN: JN8AZ08T16
P0011: Intake Valve Timing Control Range/Performance (Bank 1). ... the timing chains for him. Engine runs well but sets this correlation code P0011. At idle bank 2 is -1 degrees and bank 1 is 15 degrees. Bank 1 does not moved off 15 degrees at any time. bank 2 will go to -4 degrees while @ 2000. I could not find any clear...
March 31, 2014
2008 Infiniti G37 Sport 3.7L Cuts out, MIL Lamp on VIN: JNKCV64E18
P0011: intake valve timing control performance bank 1. The P0011 code will occur on this vehicle within 30-60 seconds of starting vehicle and letting idle. As per the repair history, removed front timing cover. Verified the correct chain timing, replaced the rear timing cover gasket (which was blown out), verified...
March 04, 2014
2004 Nissan Maxima SL 3.5L Hesitation, spark knock VIN: 1N4BA41E64
P0011: Intake Valve Timing Control Range/Performance (Bank 1). The car arrived 2.5 quarts low on oil. The oil was also filthy. I did an oil change with 0- 30 synthetic. The 2 codes were pending. I then cleared the codes and saved the scan data and freeze data. Driving the car, it has absolutely no power at all, and starts...
March 14, 2014
2004 Nissan Maxima SL 3.5L Hesitation, spark knock VIN: 1N4BA41E64
P0011: Intake Valve Timing Control Range/Performance (Bank 1). The car arrived 2.5 quarts low on oil. The oil was also filthy. I did an oil change with 0- 30 synthetic. The 2 codes were pending. I then cleared the codes and saved the scan data and freeze data. Driving the car, it has absolutely no power at all, and starts...
March 27, 2014
2006 Nissan Murano SL 3.5L MIL Lamp on VIN: JN8AZ08T16
P0011: Intake Valve Timing Control Range/Performance (Bank 1). ... the timing chains for him. Engine runs well but sets this correlation code P0011. At idle bank 2 is -1 degrees and bank 1 is 15 degrees. Bank 1 does not moved off 15 degrees at any time. bank 2 will go to -4 degrees while @ 2000. I could not find any clear...
March 31, 2014
2008 Infiniti G37 Sport 3.7L Cuts out, MIL Lamp on VIN: JNKCV64E18
P0011: intake valve timing control performance bank 1. The P0011 code will occur on this vehicle within 30-60 seconds of starting vehicle and letting idle. As per the repair history, removed front timing cover. Verified the correct chain timing, replaced the rear timing cover gasket (which was blown out), verified...
March 04, 2014
2004 Nissan Maxima SL 3.5L Hesitation, spark knock VIN: 1N4BA41E64
P0011: Intake Valve Timing Control Range/Performance (Bank 1). The car arrived 2.5 quarts low on oil. The oil was also filthy. I did an oil change with 0- 30 synthetic. The 2 codes were pending. I then cleared the codes and saved the scan data and freeze data. Driving the car, it has absolutely no power at all, and starts...
March 14, 2014
2004 Nissan Maxima SL 3.5L Hesitation, spark knock VIN: 1N4BA41E64
P0011: Intake Valve Timing Control Range/Performance (Bank 1). The car arrived 2.5 quarts low on oil. The oil was also filthy. I did an oil change with 0- 30 synthetic. The 2 codes were pending. I then cleared the codes and saved the scan data and freeze data. Driving the car, it has absolutely no power at all, and starts...
March 27, 2014
2006 Nissan Murano SL 3.5L MIL Lamp on VIN: JN8AZ08T16
P0011: Intake Valve Timing Control Range/Performance (Bank 1). ... the timing chains for him. Engine runs well but sets this correlation code P0011. At idle bank 2 is -1 degrees and bank 1 is 15 degrees. Bank 1 does not moved off 15 degrees at any time. bank 2 will go to -4 degrees while @ 2000. I could not find any clear...
March 31, 2014