P0011 Diagnostic Trouble Code Discussion for September 2013
Camshaft 1 Position Sensor Target Performance (Bank 1 Sensor 1)
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0011
| Help Request | Posted | |
| 2007 Subaru Legacy GT Limited 2.5L MIL Lamp on VIN: 4S3BL67697 P0011: Camshaft Position - Timing Over-Advanced / System Performance (Bank 1). ... diagnosing this vehicle. It came in with the check engine light on and a complaint of a rough run at higher speeds.I pulled a p0011 codefor bank 1 being over advanced. We installed a oil control valve after reading about issues with these, with same result... |
September 17, 2013 | |
| 2005 Nissan Xterra Off-Road 4.0L MIL Lamp on VIN: 5N1AN08W55 P0011: Intake Valve Timing Control Range/Performance (Bank 1). ... this Xterra and I keep getting a p0011. The scanner shows 28 degrees on the right bank at idle, 0 degrees on the left bank. I've checked the vvt solenoid and am about ready to pull the front cover to check my timing marks. There is one thing holding me bac... |
September 19, 2013 | |
| 2006 Subaru B9 Tribeca Limited 3.0L MIL Lamp on VIN: 4S4WX83C26 P0011: Camshaft Position - Timing Over-Advanced / System Performance (Bank 1). Very intermittent MIL, last time was 20,000 miles ago with exactly the same codes at which time I deleted the codes. I had thought that the low-oil level condition had caused them but the oil level was not low this time. Upon removing them today, both cam sens... |
September 20, 2013 | |
| 2008 Nissan Xterra X 4.0L MIL Lamp on VIN: 5N1AN08W98 P0011: Intake valve timing bank 1. ... Service engine light on. Diagnostic code P0021 for intake timing control. Dis-assembled to confirm cam timing was correct.Upon inspection, cam timing was confirmed correct. Reassembled and road tested. Service engine light came on with codes P0011, and P00... |
September 27, 2013 |
