Join Now
International Automotive Technicians Network

P0345 Diagnostic Trouble Code Discussion for August 2013

Camshaft Position Sensor Circuit Malfunction (Bank 2)


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0345
Help Request Posted
2007 Ford F-150 XLT 5.4L Poor Idle Quality, Cuts out, Stall, Misfire, MIL Lamp on VIN: 1FTPW14V37
P0345: Camshaft position Sensor circuit malfunction Bank 2. Vehicle originally came in as a no-start; fast cranking, no compression. Tore it down to find timing chain guide broken, stuck around crank gear causing chain to skip. Changed the phazers, guides, tensioners, chains and spark plugs and vehicle started up and r...
August 02, 2013
2006 Ford F-150 XLT 5.4L MIL Lamp on VIN: 1FTPW14V86
P0345: Cam shaft position sensor A circuit bank 2. ... worse on the right than the left. Closer inspection found both phasers faulty and the right chain loose. I replace the phasers and solenoids with actual ford parts and a timing kits made by cloyce. After the engine was all back together it started and ran ...
August 26, 2013
2007 Ford F-150 XLT 5.4L Poor Idle Quality, Cuts out, Stall, Misfire, MIL Lamp on VIN: 1FTPW14V37
P0345: Camshaft position Sensor circuit malfunction Bank 2. Vehicle originally came in as a no-start; fast cranking, no compression. Tore it down to find timing chain guide broken, stuck around crank gear causing chain to skip. Changed the phazers, guides, tensioners, chains and spark plugs and vehicle started up and r...
August 02, 2013
2006 Ford F-150 XLT 5.4L MIL Lamp on VIN: 1FTPW14V86
P0345: Cam shaft position sensor A circuit bank 2. ... worse on the right than the left. Closer inspection found both phasers faulty and the right chain loose. I replace the phasers and solenoids with actual ford parts and a timing kits made by cloyce. After the engine was all back together it started and ran ...
August 26, 2013