
P0341 Diagnostic Trouble Code Discussion for August 2013
CMP Sensor Performance
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0341
Help Request | Posted | |
2001 Volkswagen Passat GLX 4 Motion 2.8L Poor Idle Quality, Stall, MIL Lamp on VIN: WVWTH63B61 P0341: Camshaft Position Sensor A. Circuit Range/Performance. Bank 1 or Single Sensor. ... pieces. They had replaced cam sensors and the ECM. After coming in we double checked timing to find right side had jumped and was a tooth off. We pulled the cams, replaced the tensioner and positioned the cams with the correct number of chain links between... |
August 05, 2013 | |
2007 Audi A6 Quattro 3.2L MIL Lamp on VIN: WAUKH74FX7 P0341: Cam sensor implausible signal. ... need your help. We have a 2007 A6 that will set a P0341 without the engine running. In testing we have discovered that pin #2 does not have the 12 volts that it is supposed to have, instead, we are getting readings of 4.6-4.9 volts. Pin #1 has 5 volts and ... |
August 08, 2013 | |
2000 Chevrolet S10 2.2L No Start VIN: 1GCCS1458Y P0341: CMP Sensor Performance. Pulling hair trying to diagnose a no spark condition. Customer stated that the vehicle was running rough for a few days before it refused to start. Came in on a hook. We pulled codes, had a crank sensor performance and a cam sensor performance code so we check... |
August 14, 2013 | |
2003 Chevrolet Astro 4.3L Poor Idle Quality, Cuts out, Stall VIN: 1GNDM19X33 P0341: CMP Sensor Performance. ... issue.the problem occurs under very light accelerator pressure-ie cruise- never has a problem under hard acceleration.1st time in van had many problems-02 bad, tps, maf,cps & needed fuel system cleaned. all performed & van ran great. came back 4 we... |
August 27, 2013 |