Join Now
International Automotive Technicians Network

P0340 Diagnostic Trouble Code Discussion for June 2013

CMP Sensor Circuit Malfunction


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0340
Help Request Posted
2002 Nissan Maxima SE 3.5L long crank fires up VIN: JN1DA31A52
P0340: Camshaft Position Sensor Circuit Malfunction. ... Drivability complaints mentioned by cust rear exhaust manifold cracked removed manifold and replaced same car started immediately we took extended road test car ran normally and after 2 miles or so crapped out. It will crank up after extended crank but d...
June 04, 2013
1994 Ford Mustang 3.8L MIL Lamp on
P0340: cam circuit malfunction. need help with my own car , code p0340 , thought it was an easy fix at first, new cam sensor was put in, but didn't work, searched iatn's database to find it could also be an alt, so got a new one from summit racing, after a few days same code came back, put a...
June 05, 2013
2003 Jeep Grand Cherokee Laredo 4.7L No Start, Stall VIN: 1J4GW48N73
P0340: No Camshaft Sensor Signals At PCM. All things point to a bad PCM, but the dealer tells me that Chrysler only sells one PCM a week in all of North America. Anyone have this issue before. I'm afraid to order an $800 PCM and be wrong. Any help from the Chrysler/Jeep wizards greatly appreciated.
June 06, 2013
2003 Jeep Grand Cherokee Laredo 4.7L No Start, Stall VIN: 1J4GW48N73
P0340: No Camshaft Sensor Signals At PCM. All things point to a bad PCM, but the dealer tells me that Chrysler only sells one PCM a week in all of North America. Anyone have this issue before. I'm afraid to order an $800 PCM and be wrong. Any help from the Chrysler/Jeep wizards greatly appreciated.
June 07, 2013
1996 Jeep Grand Cherokee Laredo 4.0L No Start, Cuts out VIN: 1J4GZ58S0T
P0340: No Camshaft Sensor Signals At PCM. ... queen came in on a rollback 2 weeks ago as a no start condition, it had dead crankshaft position sensor with P1398 and showed no activity on live data, replaced with a bwd aftermarket and ran. 2 days later it came back in with a no start again. This time i...
June 10, 2013
2000 Nissan Sentra GXE 1.8L MIL Lamp on VIN: 3N1CB51D0Y
P0340: Camshaft Position Sensor Circuit Malfunction. ... not start after a few hours it will start code p0340 always present first came in with blown head gasket did head since head done replaced cam crank sensors via nissan ecm mass air flow timingchain set checked wireing still coming up with 340 code not sure...
June 15, 2013
2002 Ford F-350 Super Duty Lariat 7.3L Stall VIN: 1FTSW31F92
P0340: Camshaft Position Sensor Circuit Malfunction. i will start out by saying i dont know much about deisel but thought with some help here on iatn, i would give it a shot, this truck stalls when hot restsrts about 15-30 minutes later, never has a low power complaint, when it got here first thing i saw the was...
June 26, 2013
2002 Ford F-350 Super Duty Lariat 7.3L Stall VIN: 1FTSW31F92
P0340: Camshaft Position Sensor Circuit Malfunction. i will start out by saying i dont know much about deisel but thought with some help here on iatn, i would give it a shot, this truck stalls when hot restsrts about 15-30 minutes later, never has a low power complaint, when it got here first thing i saw the was...
June 27, 2013
2002 Nissan Maxima SE 3.5L long crank fires up VIN: JN1DA31A52
P0340: Camshaft Position Sensor Circuit Malfunction. ... Drivability complaints mentioned by cust rear exhaust manifold cracked removed manifold and replaced same car started immediately we took extended road test car ran normally and after 2 miles or so crapped out. It will crank up after extended crank but d...
June 04, 2013
1994 Ford Mustang 3.8L MIL Lamp on
P0340: cam circuit malfunction. need help with my own car , code p0340 , thought it was an easy fix at first, new cam sensor was put in, but didn't work, searched iatn's database to find it could also be an alt, so got a new one from summit racing, after a few days same code came back, put a...
June 05, 2013
2003 Jeep Grand Cherokee Laredo 4.7L No Start, Stall VIN: 1J4GW48N73
P0340: Camshaft Position Sensor Circuit Malfunction. All things point to a bad PCM, but the dealer tells me that Chrysler only sells one PCM a week in all of North America. Anyone have this issue before. I'm afraid to order an $800 PCM and be wrong. Any help from the Chrysler/Jeep wizards greatly appreciated.
June 06, 2013
2003 Jeep Grand Cherokee Laredo 4.7L No Start, Stall VIN: 1J4GW48N73
P0340: Camshaft Position Sensor Circuit Malfunction. All things point to a bad PCM, but the dealer tells me that Chrysler only sells one PCM a week in all of North America. Anyone have this issue before. I'm afraid to order an $800 PCM and be wrong. Any help from the Chrysler/Jeep wizards greatly appreciated.
June 07, 2013
1996 Jeep Grand Cherokee Laredo 4.0L No Start, Cuts out VIN: 1J4GZ58S0T
P0340: No Camshaft Sensor Signals At PCM. ... queen came in on a rollback 2 weeks ago as a no start condition, it had dead crankshaft position sensor with P1398 and showed no activity on live data, replaced with a bwd aftermarket and ran. 2 days later it came back in with a no start again. This time i...
June 10, 2013
2000 Nissan Sentra GXE 1.8L MIL Lamp on VIN: 3N1CB51D0Y
P0340: Camshaft Position Sensor Circuit Malfunction. ... not start after a few hours it will start code p0340 always present first came in with blown head gasket did head since head done replaced cam crank sensors via nissan ecm mass air flow timingchain set checked wireing still coming up with 340 code not sure...
June 15, 2013
2002 Ford F-350 Super Duty Lariat 7.3L Stall VIN: 1FTSW31F92
P0340: Camshaft Position Sensor Circuit Malfunction. i will start out by saying i dont know much about deisel but thought with some help here on iatn, i would give it a shot, this truck stalls when hot restsrts about 15-30 minutes later, never has a low power complaint, when it got here first thing i saw the was...
June 26, 2013
2002 Ford F-350 Super Duty Lariat 7.3L Stall VIN: 1FTSW31F92
P0340: Camshaft Position Sensor Circuit Malfunction. i will start out by saying i dont know much about deisel but thought with some help here on iatn, i would give it a shot, this truck stalls when hot restsrts about 15-30 minutes later, never has a low power complaint, when it got here first thing i saw the was...
June 27, 2013