Join Now
International Automotive Technicians Network

P0340 Diagnostic Trouble Code Discussion for April 2013

CMP Sensor Circuit Malfunction


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0340
Help Request Posted
2002 Chrysler PT Cruiser 2.4L Stall, MIL Lamp on VIN: 3C4FY48B02
P0340: Camshaft Position Sensor Circuit Malfunction. ... encoutered before: engine starts and runs OK, but stalls when cam sensor is plugged in. Unplug cam sensor wire and vehicle will start. It does this every time. Found the usual code P0340 in it, checked wiring harness from cam sensor to ECM: no shorts, no b...
April 02, 2013
2002 Chrysler PT Cruiser 2.4L Stall, MIL Lamp on VIN: 3C4FY48B02
P0340: Camshaft Position Sensor Circuit Malfunction. ... encoutered before: engine starts and runs OK, but stalls when cam sensor is plugged in. Unplug cam sensor wire and vehicle will start. It does this every time. Found the usual code P0340 in it, checked wiring harness from cam sensor to ECM: no shorts, no b...
April 03, 2013
2003 Saab 9-3 Linear 2.0L Poor Idle Quality, Misfire, MIL Lamp on VIN: YS3FB49SX3
P0340: ignition sync malfuntion. ... months. Battery was dead. Charged the battery and tested ok. Vehicle ran rough checked for codes and found p0303 stored in T8 module. Swapped coil to another cylinder and found midfire followed coil. Replaced coil with new coil...
April 05, 2013
2004 Chrysler PT Cruiser GT 2.4L No Start, MIL Lamp on, VIN: 3C8FY78G14
P0340: Camshaft Position Sensor Circuit Malfunction. ... back, check eng light came on, no driveability conplaints. Brought back to shop. Scan, and po340/p0335 returned. Checked circuitry, good., came to the conclusion pcm is the problem., install new computer, have vehicled programed, with all available updates...
April 10, 2013
2004 Chrysler PT Cruiser GT 2.4L No Start, MIL Lamp on, VIN: 3C8FY78G14
P0340: Camshaft Position Sensor Circuit Malfunction. ... back, check eng light came on, no driveability conplaints. Brought back to shop. Scan, and po340/p0335 returned. Checked circuitry, good., came to the conclusion pcm is the problem., install new computer, have vehicled programed, with all available updates...
April 12, 2013
2002 Chrysler PT Cruiser 2.4L Stall, MIL Lamp on VIN: 3C4FY48B02
P0340: Camshaft Position Sensor Circuit Malfunction. ... encoutered before: engine starts and runs OK, but stalls when cam sensor is plugged in. Unplug cam sensor wire and vehicle will start. It does this every time. Found the usual code P0340 in it, checked wiring harness from cam sensor to ECM: no shorts, no b...
April 02, 2013
2002 Chrysler PT Cruiser 2.4L Stall, MIL Lamp on VIN: 3C4FY48B02
P0340: Camshaft Position Sensor Circuit Malfunction. ... encoutered before: engine starts and runs OK, but stalls when cam sensor is plugged in. Unplug cam sensor wire and vehicle will start. It does this every time. Found the usual code P0340 in it, checked wiring harness from cam sensor to ECM: no shorts, no b...
April 03, 2013
2003 Saab 9-3 Linear 2.0L Poor Idle Quality, Misfire, MIL Lamp on VIN: YS3FB49SX3
P0340: ignition sync malfuntion. ... months. Battery was dead. Charged the battery and tested ok. Vehicle ran rough checked for codes and found p0303 stored in T8 module. Swapped coil to another cylinder and found midfire followed coil. Replaced coil with new coil...
April 05, 2013
2004 Chrysler PT Cruiser GT 2.4L No Start, MIL Lamp on, VIN: 3C8FY78G14
P0340: Camshaft Position Sensor Circuit Malfunction. ... back, check eng light came on, no driveability conplaints. Brought back to shop. Scan, and po340/p0335 returned. Checked circuitry, good., came to the conclusion pcm is the problem., install new computer, have vehicled programed, with all available updates...
April 10, 2013
2004 Chrysler PT Cruiser GT 2.4L No Start, MIL Lamp on, VIN: 3C8FY78G14
P0340: Camshaft Position Sensor Circuit Malfunction. ... back, check eng light came on, no driveability conplaints. Brought back to shop. Scan, and po340/p0335 returned. Checked circuitry, good., came to the conclusion pcm is the problem., install new computer, have vehicled programed, with all available updates...
April 12, 2013