Join Now
International Automotive Technicians Network

P0352 Diagnostic Trouble Code Discussion for March 2013

Ignition Coil 2 Primary/Secondary Circuit Malfunction


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0352
Help Request Posted
2008 Ford F-150 XLT 4.2L Cuts out VIN: 1FTRF12258
P0352: Coil driver. ... that didnt have reflash capabilities after ecm replacment. Reflashed and started found it running rough setting a p0352 (thats the reason the ecm was replaced) Ive lab scoped the signal at the pcm. driver a and c have signal and driver b has no signal comi...
March 02, 2013
1999 Jeep Grand Cherokee Limited 4.7L Poor Idle Quality, Hesitation, Cuts out, Stall, Misfire, MIL Lamp on VIN: 1J4GW68N9X
P0352: Ignition Coil 2 Primary Circuit Malfunction. Vehicle hard to start, sometimes w/half way acc. Pedal start fine, if let go the acc. Pedal start missing, making noise by timig chain and dies. Codes start appearing, not sure if the ecm is causing this. There are power and ground. Please help.
March 26, 2013
2008 Ford F-150 XLT 4.2L Cuts out VIN: 1FTRF12258
P0352: Coil driver. ... that didnt have reflash capabilities after ecm replacment. Reflashed and started found it running rough setting a p0352 (thats the reason the ecm was replaced) Ive lab scoped the signal at the pcm. driver a and c have signal and driver b has no signal comi...
March 02, 2013
1999 Jeep Grand Cherokee Limited 4.7L Poor Idle Quality, Hesitation, Cuts out, Stall, Misfire, MIL Lamp on VIN: 1J4GW68N9X
P0352: Ignition Coil 2 Primary Circuit Malfunction. Vehicle hard to start, sometimes w/half way acc. Pedal start fine, if let go the acc. Pedal start missing, making noise by timig chain and dies. Codes start appearing, not sure if the ecm is causing this. There are power and ground. Please help.
March 26, 2013