Join Now
International Automotive Technicians Network

P1260 Diagnostic Trouble Code Discussion for January 2013

Immobilizer System Malfunction


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P1260
Help Request Posted
2008 Saab 9-5 Aero 2.3L MIL Lamp on VIN: YS3EH59G48
P1260: throttle return spring. ... time and after start up the check engine light comes on and code p0101.p1260. we installed new plugs and checked fuel pressure and all that was ok.recently had a new crank sensor installed also.as for the mass air flow sensor we installed a new one and sti...
January 05, 2013
2000 Saab 9-3 2.0L MIL Lamp on VIN: YS3DD35H3Y
P1260: throttle return spring weak. ... helped me out a couple times and asking for 1 more. Did some valve work on this engine. Did not remove the intake or disconnect anything on the throttle body, just unbolted intake and pushed back a bit. After all together, all is good. On road test, check ...
January 09, 2013
2008 Saab 9-5 Aero 2.3L MIL Lamp on VIN: YS3EH59G48
P1260: throttle return spring. ... time and after start up the check engine light comes on and code p0101.p1260. we installed new plugs and checked fuel pressure and all that was ok.recently had a new crank sensor installed also.as for the mass air flow sensor we installed a new one and sti...
January 05, 2013
2000 Saab 9-3 2.0L MIL Lamp on VIN: YS3DD35H3Y
P1260: throttle return spring weak. ... helped me out a couple times and asking for 1 more. Did some valve work on this engine. Did not remove the intake or disconnect anything on the throttle body, just unbolted intake and pushed back a bit. After all together, all is good. On road test, check ...
January 09, 2013