Join Now
International Automotive Technicians Network

P0017 Diagnostic Trouble Code Discussion for December 2012

Crankshaft/Camshaft Timing Misalignment (Bank 1 Sensor 2)


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0017
Help Request Posted
2008 Saturn Vue XR 3.6L MIL Lamp on VIN: 3GSDL63738
P0017: right exhaust cam/crank correlation error. this vehicle would keep setting code p0017,runs great,no issues there. i ran a quick cleen product in oil for half a day then changed oil. i actuated the cam actuators with snap on scanner, the others clicked,right exhaust did nothing.i replaced that actuator,...
December 12, 2012
2007 Chevrolet Colorado LS 2.9L Poor Idle Quality, Stall, Misfire, MIL Lamp on VIN: 1GCCS14917
P0017: Crankshaft Position - Exhaust Camshaft Position Correlation. Thank you to all who take time to read this and help if possible. I have a 2007 Colorado that has been extremely well serviced. every 1500 to 2k mile oil changes driven by an elderly gentleman that takes it pretty easy. hasn't had any engine work done before. ...
December 13, 2012
2008 Saturn Vue XR 3.6L MIL Lamp on VIN: 3GSDL63738
P0017: right exhaust cam/crank correlation error. this vehicle would keep setting code p0017,runs great,no issues there. i ran a quick cleen product in oil for half a day then changed oil. i actuated the cam actuators with snap on scanner, the others clicked,right exhaust did nothing.i replaced that actuator,...
December 12, 2012
2007 Chevrolet Colorado LS 2.9L Poor Idle Quality, Stall, Misfire, MIL Lamp on VIN: 1GCCS14917
P0017: Crankshaft Position - Exhaust Camshaft Position Correlation. Thank you to all who take time to read this and help if possible. I have a 2007 Colorado that has been extremely well serviced. every 1500 to 2k mile oil changes driven by an elderly gentleman that takes it pretty easy. hasn't had any engine work done before. ...
December 13, 2012