Join Now
International Automotive Technicians Network

P0011 Diagnostic Trouble Code Discussion for August 2012

Camshaft 1 Position Sensor Target Performance (Bank 1 Sensor 1)


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0011
Help Request Posted
2004 Land Rover Range Rover HSE 4.4L MIL Lamp on VIN: SALME11454
P0011: cam timing over advanced. This Rover came in with chain rails gone and the motor rattling badly from the chains. First we replaced left and right and center chain guides; we removed the oil pan (lower) and cleaned all the debris out of pick up and pan. We had a pretty good rattle on st...
August 09, 2012
2004 Ford F-150 Lariat 5.4L Poor Idle Quality VIN: 1FTPW12514
P0011: Intake Camshaft Position Timing Over Advanced (Bank 1). Setting code p0011 after about a half block of driving. Solenoid for bank 1 already replaced by customer with ford part. Can see cam timing error on bank 1 of about 15 degrees when accelerating. Duty cycle 62%. Cam timing error 0 at idle. Suspect cam phaser is...
August 17, 2012
2004 Land Rover Range Rover HSE 4.4L MIL Lamp on VIN: SALME11454
P0011: cam timing over advanced. This Rover came in with chain rails gone and the motor rattling badly from the chains. First we replaced left and right and center chain guides; we removed the oil pan (lower) and cleaned all the debris out of pick up and pan. We had a pretty good rattle on st...
August 09, 2012
2004 Ford F-150 Lariat 5.4L Poor Idle Quality VIN: 1FTPW12514
P0011: Intake Camshaft Position Timing Over Advanced (Bank 1). Setting code p0011 after about a half block of driving. Solenoid for bank 1 already replaced by customer with ford part. Can see cam timing error on bank 1 of about 15 degrees when accelerating. Duty cycle 62%. Cam timing error 0 at idle. Suspect cam phaser is...
August 17, 2012