P0016 Diagnostic Trouble Code Discussion for June 2012
Crankshaft/Camshaft Timing Misalignment
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P0016
| Help Request | Posted | |
| 2004 Cadillac SRX 3.6L MIL Lamp on VIN: 1GYDE63704 P0016: Crankshaft Position - Intake Camshaft Position Correlation (Bank 1). Hey guys and gals, hope everyone is doing well and staying busy!! This vehicle came to a fellow tech by way of a mutual friend. The car had a check engine light and a rattle under 2500 RPM. The customer replaced the cam sensors, but when this didn't turn off ... |
June 13, 2012 | |
| 2007 Mercedes-Benz CLK350 3.5L MIL Lamp on VIN: WDBTK56G07 P0016: Constant adjustment of right bank intake cam direction retarded. This car originally came in with the P0016 and P0017 and we found the balance shaft gear missing a bunch of teeth (of course). After pulling the motor and replacing all the necessary parts with a kit from the Benz dealer as instructed by the TSB's on this prob... |
June 14, 2012 | |
| 2007 Volkswagen Eos 2.0T 2.0L MIL Lamp on VIN: WVWFA71F67 P0016: cam/crank corrilation issue g40 g28. ... check cam timing found one tooth off intake cam, tried to reinstall (with oem cam holding tools) what we found was, the cam adjuster was jammed from the forceful break of the chain. It was not possible to install the chain correctly because of the broke ca... |
June 15, 2012 | |
| 2007 Volkswagen Eos 2.0T 2.0L MIL Lamp on VIN: WVWFA71F67 P0016: cam/crank corrilation issue g40 g28. ... check cam timing found one tooth off intake cam, tried to reinstall (with oem cam holding tools) what we found was, the cam adjuster was jammed from the forceful break of the chain. It was not possible to install the chain correctly because of the broke ca... |
June 16, 2012 | |
| 2004 Chevrolet Silverado 2500 HD 6.6L MIL Lamp on VIN: 1GCHK29284 P0016: Crankshaft Position - Camshaft Position Correlation. hoping for some insight , |
June 26, 2012 |
