Join Now
International Automotive Technicians Network

P0353 Diagnostic Trouble Code Discussion for May 2012

Ignition Coil 3 Primary/Secondary Circuit Malfunction


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P0353
Help Request Posted
2002 Jeep Grand Cherokee Laredo 4.0L Poor Idle Quality, Cuts out, Stall, Misfire, MIL Lamp on VIN: 1J4GX48S52
P0353: Ignition Coil 3 Primary Circuit Malfunction. I have a P0353 code and no ground signal to coil driver #3 (tan and orange wire). Ohm tested the 3 driver wires from the coil connector to PCM connector and all 3 are are good. Ohm tested tan and orange wire (#3 driver) to ground and its not grounded. Replaced...
May 25, 2012
2002 Jeep Grand Cherokee Laredo 4.0L Poor Idle Quality, Cuts out, Stall, Misfire, MIL Lamp on VIN: 1J4GX48S52
P0353: Ignition Coil 3 Primary Circuit Malfunction. I have a P0353 code and no ground signal to coil driver #3 (tan and orange wire). Ohm tested the 3 driver wires from the coil connector to PCM connector and all 3 are are good. Ohm tested tan and orange wire (#3 driver) to ground and its not grounded. Replaced...
May 28, 2012
2002 Jeep Grand Cherokee Laredo 4.0L Poor Idle Quality, Cuts out, Stall, Misfire, MIL Lamp on VIN: 1J4GX48S52
P0353: Ignition Coil 3 Primary Circuit Malfunction. I have a P0353 code and no ground signal to coil driver #3 (tan and orange wire). Ohm tested the 3 driver wires from the coil connector to PCM connector and all 3 are are good. Ohm tested tan and orange wire (#3 driver) to ground and its not grounded. Replaced...
May 25, 2012
2002 Jeep Grand Cherokee Laredo 4.0L Poor Idle Quality, Cuts out, Stall, Misfire, MIL Lamp on VIN: 1J4GX48S52
P0353: Ignition Coil 3 Primary Circuit Malfunction. I have a P0353 code and no ground signal to coil driver #3 (tan and orange wire). Ohm tested the 3 driver wires from the coil connector to PCM connector and all 3 are are good. Ohm tested tan and orange wire (#3 driver) to ground and its not grounded. Replaced...
May 28, 2012