Join Now
International Automotive Technicians Network

P2106 Diagnostic Trouble Code Discussion for February 2012

Electronic Throttle Control - Forced Limited Power


Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Trouble Ticket Help Requests for DTC P2106
Help Request Posted
2003 Dodge Ram 2500 Truck 5.7L MIL Lamp on VIN: 3D7KU28D93
P2106: Electronic Throttle Control System - Forced Limited Power. i have a dodge pickup that will not accelerate or idle, the throttle plate will not move.there is no vacumm in the intake.i replaced the throttle assembly and did a relearn,to no avail.with key on engine off the tps sensors are in spec but will not change beca...
February 14, 2012
2005 Ford E-350 Club Wagon Chateau 5.4L Hesitation, Cuts out, Stall, Misfire, MIL Lamp on VIN: 1FBNE31LX5
P2106: Throttle Actuator Control System - Forced Limited Power. This vehicle was brought in three weeks ago with the complaint that the vehicle (When Warm) Shut off a few times, But restarted just fine. At this time I pulled codes and had all the same codes I have today. I removed and cleaned the MAF and also removed the t...
February 28, 2012
2003 Dodge Ram 2500 Truck 5.7L MIL Lamp on VIN: 3D7KU28D93
P2106: Electronic Throttle Control System - Forced Limited Power. i have a dodge pickup that will not accelerate or idle, the throttle plate will not move.there is no vacumm in the intake.i replaced the throttle assembly and did a relearn,to no avail.with key on engine off the tps sensors are in spec but will not change beca...
February 14, 2012
2005 Ford E-350 Club Wagon Chateau 5.4L Hesitation, Cuts out, Stall, Misfire, MIL Lamp on VIN: 1FBNE31LX5
P2106: Throttle Actuator Control System - Forced Limited Power. This vehicle was brought in three weeks ago with the complaint that the vehicle (When Warm) Shut off a few times, But restarted just fine. At this time I pulled codes and had all the same codes I have today. I removed and cleaned the MAF and also removed the t...
February 28, 2012